06-11-2015 12:36 AM
Hi,
Have installed 10.6 and trying to get my head round some issues :
1. I have found a Service pack but can't load it, although very thing is in place :
lg-spes-cpa01/admin# sh repository upgrade
cpc-assurance-patchbundle-10.6.0.58162-1.x86-64.tar.gz
lg-spes-cpa01/admin# application upgrade cpc-assurance-patchbundle-10.6.0.58162-1.x86-64.tar.gz upgrade
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Remote file not found
lg-spes-cpa01/admin#
As we have now lost root access I can see no way to load the file locally, I tried :
lg-spes-cpa01/admin# copy sftp://10.124.128.34/CUCM_ISO/Prime/cpc-assurance-patchbundle-10.6.0.58162-1.x86-64.tar.gz disk:/localdisk
Username: cucmsftp
Password:
% Error: Transfer failed
But suspect this maybe caught up in the same error as above.
2. Added a new user but they dont see the CUCM which I have added under Globaladmin
3. Also, backup works but the restore does not, because it does not like the url define in the repository "invalid characaters"
lg-spes-cpa01/admin(config-Repository)# url sftp://10.124.128.34/PCA_Backup
which I can only take to be the "/" as it is not in the list displayed, of acceptable characaters, in the error
Any comments appreicated
Ian
06-11-2015 01:09 AM
I have also tried the following :
lg-spes-cpa01/admin# patch install cpc-assurance-patchbundle-10.6.0.58162-1.x86-64.tar.gz upgrade
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Remote file not found
lg-spes-cpa01/admin#
06-11-2015 01:36 AM
Have now loaded the patch via a TFTP url and updated too the patch.
However tis has not fixed point 2, my added user can not see the CUCM added.
06-16-2015 03:29 PM
Can you explain better the point 2? Are you talking about the jtapi user?
Tnx
Regards
Arthur
06-17-2015 09:18 AM
Hi,
Under Globaladmin, I added our 10.5 UCM Cluster and go to Home and select to see the status.
I have then created two users under User Mangement.
When I go to Home, they have no UCM Cluster to view. Also no cluster in UC CLuster Status,
they see the Log's
Hope this helps
Ian
06-17-2015 11:04 AM
Hi
Now I understand the point.
For add more Assurance Domains for the users:
I hope will be helpful
Regards
Arthur
06-18-2015 03:04 AM
06-23-2015 01:00 PM
Hi Ian
Did you resolve the problem? I think that you should open a cisco case with the TAC
Regards
Arthur
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: