cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
1093
Views
0
Helpful
4
Replies

problem with TFTP server when upgrade CUE

Hi

I have router 2811 with AIM-CUE Card I have to Upgrade this CUE from 3.2 to 7.01

When I try to copy by useing commond Software download clean url ftp://10.10.10.2/cue-vm-k9.nm-aim.7.0.1.pkg

give me

Downloading ftp cue-vm-k9.nm-aim.7.0.1.pkg

Download error 

Can not download cue-vm-k9.nm-aim.7.0.1.pkg

error code 0 : error type 'couldn't connect to host'

Although I can ping tftp server 10.10.10.2 from cue and vice versa

se-192-168-100-10.localdomain> ping 10.10.10.2  -------------------------------> tftp server

PING 10.10.10.2 (10.10.10.2) 56(84) bytes of data.

64 bytes from 10.10.10.2: icmp_seq=1 ttl=126 time=0.701 ms

64 bytes from 10.10.10.2: icmp_seq=2 ttl=126 time=0.499 ms

64 bytes from 10.10.10.2: icmp_seq=3 ttl=126 time=0.457 ms

64 bytes from 10.10.10.2: icmp_seq=4 ttl=126 time=0.440 ms

64 bytes from 10.10.10.2: icmp_seq=5 ttl=126 time=0.404 ms

interface Loopback0

ip address 192.168.100.1 255.255.255.0

!

interface Service-Engine0/0

ip unnumbered Loopback0

service-module ip address 192.168.100.10 255.255.255.0

service-module ip default-gateway 192.168.100.1

Is there anything I have to do?

Thanks

Akaff

1 Accepted Solution

Accepted Solutions

kking2008
Level 1
Level 1
4 Replies 4

kking2008
Level 1
Level 1

You're gonna need an FTP server, TFTP will not work with CUE upgrades.

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_0/install/upgrade.html#wp1148118

rizwanr74
Level 7
Level 7

delete your existing TFTP Server and try with this:

http://tftpd32.jounin.net/download/Tftpd32_SE-4.00-setup.exe

Thanks

Rizwan Rafeek

Hi rizwanr,

I checked,

It's same

Thank you for replaying

Thank you KKing 2008

That was the problem I download FTP Server and it is work fine

Thanks all.