Problem with uc-locale-en_GB-8.6.2.1-12.cop selection on unity connection cluster

[williamsmj7]

Hi All,

Hopefully someone can help me out. I'm trying to install uc-locale-en_GB-8.6.2.1-12.cop on our unity connection cluster which is running 8.6.2.20000-2. The cop files successfully installs and I've rebooted the both servers but I cannot select the language anywhere in unity connection administration.

I suspect this is because I'm running 8.6(2a) from the cisco site and not Unity Connection 8.6(2) Engineering Special 12 as per the release notes for Unity Connection 8.6(2a). Are Cisco likely to release language packs for version 8.6(2a)? Otherwise I guess I'm going to have to try and raise a TAC call and get access to the engineering special so I can gain the british langauge back again.

For reference :-

admin:show version active

Active Master Version: 8.6.2.20000-2

Active Version Installed Software Options:

uc-locale-en_GB-8.6.2.1-12.cop

ciscocm.refresh_upgrade_v1.1.cop

cm-locale-en_GB-8.6.2.1000-1.cop

Thanks,

Mike

[Rob Huffman]

Hi Mike,

I'm not sure about the versioning, but  am curious if you followed these steps;

To Install Connection 8.x Language Files from a Disc

---

Step 1 Stop the Connection Conversation Manager and Connection Mixer services:

a. Start Cisco Unity Connection Serviceability.

b. From the Tools menu, select Service Management.

c. Under Critical Services, in the Connection Conversation Manager row, select Stop.

d. Wait for the service to stop.

e. Also under Critical Services, in the Connection Mixer row, select Stop.

f. Wait for the service to stop.

Step 2 Insert the Languages disc in the disc drive.

Step 3 Sign in to Cisco Unified Operating System Administration.

Step 4 From the Software Upgrades menu, select Install/Upgrade. The Software Installation/Upgrade window appears.

Step 5 In the Source list, select DVD/CD.

Step 6 In the Directory field, enter the path to the folder that contains the language file on the CD or DVD.

If the language file is in the root folder or if you created an ISO image DVD, enter a slash (/) in the Directory field.

Step 7 To continue the language installation process, select Next.

Step 8 Select the language that you want to install, and select Next.

Step 9 Monitor the progress of the download.

Step 10 If you want to install another language: Select Install Another, and repeat Step 4 through Step 9.

If you are finished installing languages: Restart services:

a. Start Cisco Unity Connection Serviceability.

b. From the Tools menu, select Service Management.

c. Under Critical Services, in the Connection Conversation Manager row, select Start.

d. Wait for the service to start.

e. Also under Critical Services, in the Connection Mixer row, select Start.

f. Wait for the service to start.

g. If you installed Japanese: Run the CLI command utils service restart Cisco Tomcat to restart the Tomcat service.

Note Make sure that the multilingual .cop files are installed on the exact specific CUC build that they were created for. Applying incorrect .cop files for your specific version results in an unexpected behavior of the user conversations.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug027.html#wp1054157

Cheers!

Rob

[williamsmj7]

Hi Rob,

I did follow that procedure and also restart the servers after installing the language pack. I also tried using the CLI to delete the locale and then added it again as above with a restart just for good measure.

Still no luck though :-(

Thanks,

Mike

[Rob Huffman]

Hi Mike,

Bummer!

I just wasn't sure if you had shut down the Connection Conversation Manager and Connection Mixer services

before starting. I guess you are right.....time for TAC. Seeing that 8.6.(2) is deferred the 8.6(2a) locales

should be available I would think.

Sorry I couldn't have been more help here

Cheers!

Rob

PS: please let us know how you make out.

[williamsmj7]

Thanks Rob. I'll write an email to our supplier as heaven forbid an end user talk to Cisco directly in the UK. I'll let you know how I get on.

[srichardson]

Rob,

Where do you see that 8.6.2 is deferred?  8.6.2 Connection is still downloadable, no mention of an ES.  But, the locales have definitely changed.  I downloaded just prior to 1/17/12 and had no issue.  My locales are version and did not require ES12, so something happened as they are not visible anymore, but there is no deferral note, either.  Do you know something?  I happen to have a failed cluster with UK English right now, so may be a clue.

Stephanie

[colins]

Hi Mike,

We have exactly the same problem with CUCM Business Edition 5000. I might log a call with TAC tomorrow unless someone can come up with the solution before then. If I get a solution from TAC I will post it up here.

Cheers

Colin

[guilhem.perez]

Hi,

I meet the same issue with FR locale and using CUC version 8.6.2.20000-2.

Does somebody know what version is Unity Connection 8.6.2 ES 12 because we can download only 8.6.2 or 8.6.2(a)?

Thank you

[colins]

Hi,

I have logged a TAC case with Cisco regarding this. I will post the results here as soon as I get them.

Colin

[colins · Accepted solution]

Hi All,

Please see the response from Cisco TAC below

"The reason you are still not able to select GB as the default language is because Connection 8.6.2 version of languages other than ENU are released but these locales work with Connection 8.6(2) Engineering Special 12 version.

Supported Document-->

Installing Additional Cisco Unity Connection Languages
http://tools.cisco.com/squish/2037E

Your current version is 8.6(2a) and therefore, you will have to install ES12 to get the locales compatible with CUC version. Please let me know your CCO ID and I will publish ES12 for you as it is not available on CCO yet."

Regards

Colin

[williamsmj7]

Cisco have also responded saying that we need to upgrade the ES12 as above. I've scheduled a change for the 11th of Feb to upgrade and try the locales. If Anyone trys it before please tell me how you get on!

[Rob Huffman]

Hey Colin & Mike,

Thanks for posting back with your updates to this good