08-10-2018 03:54 AM
Can anyone explain what below configuration says.
DSP groups on slot 0/4 slot id 4
dsp 1:
State: UP, firmware: 46.2.2
Max signal/voice channel: 64/64
Max credits: 960, Voice credits: 960, Video credits: 0
num_of_sig_chnls_allocated: 0
Transcoding channels allocated: 5
Group: FLEX_GROUP_VOICE, complexity: FLEX
Shared credits: 352, reserved credits: 0
Signaling channels allocated: 0
Voice channels allocated: 0
Credits used (rounded-up): 0
Group: FLEX_GROUP_XCODE, complexity: HIGH
Shared credits: 0, reserved credits: 150
Transcoding channels allocated: 0
Credits used (rounded-up): 0
Group: FLEX_GROUP_CONF, complexity: CONFERENCE
Shared credits: 0, reserved credits: 458
Codec: CONF_G729, maximum participants: 8
Sessions per dsp: 10
Slot: 0/4
Device idx: 0
Dsp Type: SP2700
08-11-2018 09:54 AM
I highly recommend reviewing this post, which lays it out line by line:
Understanding the output of "show voice dsp group all"
Thanks!
Ryan
08-15-2018 05:54 AM
You may refer to this document created by Ayodeji Okanlawon,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: