cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
319
Views
0
Helpful
5
Replies

SMART LIC 12.X - how to use Bundle UWL 35 License

Greetings,

I have Activated Smart licenses to Call Manager from smart account registration.

I have noticed that it is not utilizing BE6000 Starter Bundle UWL 35 license at all. Secondly I have notices it is also not utilizing Basic Messaging User (Voicemail) license. And for one another site it is not utilizing UCXN-12X-SC-PORTS.

Can you please advice me how can I make this licenses used.

Kind Regards,

2 Accepted Solutions

Accepted Solutions

The BE6000 Starter Bundle UWL 35  bundle was an old promotion AFAIK its no more active. Btw are you using FLex or perpetual license ?

This was activated using the command from CLI utils BE6000Mode enable

 

The licenses usage reported will be based on what you have configured . if  The user has advanced voicemail access basic licenses wont be used.

 



Response Signature


View solution in original post

b.winter
VIP
VIP

You need to enter the command via CUCM-CLI "utils BE6000Mode enable" and then select the appropriate Starter Bundle.
About the Unity Licenses: Do you also have connected your Unity to the Smart Account? And have you configured Voicemail-User and / or Speech Connect Ports (they are per default in every order I think, but I have never used them)? If not, no licenses are needed and no licenses will be used.

View solution in original post

5 Replies 5

The BE6000 Starter Bundle UWL 35  bundle was an old promotion AFAIK its no more active. Btw are you using FLex or perpetual license ?

This was activated using the command from CLI utils BE6000Mode enable

 

The licenses usage reported will be based on what you have configured . if  The user has advanced voicemail access basic licenses wont be used.

 



Response Signature


Dear Nithin,

Thank you for your reply.

Yes I have perpetual license. I will try this command and check.

Dear b.winter,

Yes I have already added the Unity to Smart Account.

 

I have one more question, do we need to have  any Server count license. If I have 2 servers, with 1 Publisher and 1 Subscriber for CUCM and CUC.

 

In every Cluster (CUCM cluster with CUCM and IMP / CUC Cluster) only the Pub is taking care about the licenses.

Only pub connect with SMART account.



Response Signature


b.winter
VIP
VIP

You need to enter the command via CUCM-CLI "utils BE6000Mode enable" and then select the appropriate Starter Bundle.
About the Unity Licenses: Do you also have connected your Unity to the Smart Account? And have you configured Voicemail-User and / or Speech Connect Ports (they are per default in every order I think, but I have never used them)? If not, no licenses are needed and no licenses will be used.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: