11-07-2009 06:28 PM - edited 03-18-2019 11:58 PM
Hi,
I have a 7975 IP Phone with two 7916 addons. I have set button 1 and 2 as Line and want to configure the other 54 buttons as speed dials. The 7975 Phone template only allows me 40 speed dials after choosing button 1 and 2 as line. Why this limitation when the physical Phone with addons have 54 buttons programmable for speed dials.
For Abbreviated dialing, customer would like to avoid printing out a sheet to see what abbreviated dial number corresponds to number been called. Anyway around this?
Running Unified Callmanager 6.1
11-07-2009 06:47 PM
Hey Paul,
Here are the details for this issue. This has been fixed in CUCM 7.1(3) versions with the 8.5(3) firmware, but no other versions.
Cisco Unified Communications Manager 4.2(3)SR3a, 4.3(2), 5.1(3)b, and 6.1(1), 7.0 and 7.1
Total Number of Buttons Supported
Cisco Unified IP Phone 7975G = 42
Cisco Unified Communications Manager 7.1(3) / Cisco IP Phone Firmware 8.5(3) and later
Total Number of Buttons Supported
Cisco Unified IP Phone 7975G = 54
Cisco Unified Communications Manager Express 4.3 and later
Total Number of Buttons Supported
Cisco Unified IP Phone 7975G = 54
From this 7916 Data Sheet;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/data_sheet_c78-468673.html
Hope this helps!
Rob
11-09-2009 05:02 PM
Thanks Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide