cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1233
Views
0
Helpful
3
Replies

Unity 8.6.2 Disk size for MCS 7845I3 sever

Hasrat Raja
Level 1
Level 1

under supported platform requirement for  Hard Disk it is listed as "Four 300-GB SAS 2.5-in. hot-swap hard disks; 2  RAID 1s"  for Platform 7845I3.

http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/supported_platforms/8xcucspl.html

Show hardware is showing as follows on my server:

PD Type: SAS

Raw Size: 279.396 GB [0x22ecb25c Sectors]

Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]

Coerced Size: 278.464 GB [0x22cee000 Sectors]

is it correct size for upgrade ?

thanks

1 Accepted Solution

Accepted Solutions

It looks like you have 4 300GB drives which meets the requirements.

This looks to be speced IBM 7845I3 which is fully supported, so you are good to go.

HTH,

Chris

View solution in original post

3 Replies 3

Chris Deren
Hall of Fame
Hall of Fame

What version are you running now?

If appliance based can you post the full "show hardware" from CLI?

Chris

Hi Chris,

Please see show version & show hardware

thanks

admin:show version active

Active Master Version: 8.0.3.23031-1

Active Version Installed Software Options:

No Installed Software Options Found.

admin:

admin:

admin:show hardware

HW Platform       : 7845I3

Processors        : 2

Type              : Intel(R) Xeon(R) CPU           E5540  @ 2.53GHz

CPU Speed         : 2530

Memory            : 8192 MBytes

Object ID         : 1.3.6.1.4.1.9.1.587

OS Version        : UCOS 4.0.0.0-45

Serial Number     : KQ2598V

RAID Version      :

Raid firmware version: 11.0.1-0022

BIOS Information  :

IBMCorp. -[D6E131CUS-1.05]- 11/25/2009

RAID Details      :

                    Versions

                ================

Product Name    : IBM ServeRAID-MR10i SAS/SATA Controller

Serial No       : P472881910

FW Package Build: 11.0.1-0022

                Settings

                ================

Current Time                     : 14:1:30 10/8, 2012

Predictive Fail Poll Interval    : 300sec

Interrupt Throttle Active Count  : 16

Interrupt Throttle Completion    : 50us

Rebuild Rate                     : 30%

PR Rate                          : 30%

Resynch Rate                     : 30%

Check Consistency Rate           : 30%

Reconstruction Rate              : 30%

Cache Flush Interval             : 4s

Max Drives to Spinup at One Time : 2

Delay Among Spinup Groups        : 12s

Physical Drive Coercion Mode     : 1GB

Cluster Mode                     : Disabled

Alarm                            : Enabled

Auto Rebuild                     : Enabled

Battery Warning                  : Enabled

Ecc Bucket Size                  : 15

Ecc Bucket Leak Rate             : 1440 Minutes

Restore HotSpare on Insertion    : Disabled

Expose Enclosure Devices         : Enabled

Maintain PD Fail History         : Disabled

Host Request Reordering          : Enabled

Auto Detect BackPlane Enabled    : SGPIO/i2c SEP

Load Balance Mode                : Auto

Use FDE Only                     : No

Security Key Assigned            : No

Security Key Failed              : No

Security Key Not Backedup        : No

Any Offline VD Cache Preserved   : No

                Device Present

                ================

Virtual Drives    : 2

  Degraded        : 0

  Offline         : 0

Physical Devices  : 5

  Disks           : 4

  Critical Disks  : 0

  Failed Disks    : 0

Battery Back Up Information:

==========================

BBU status for Adapter: 0

BatteryType: iBBU

Voltage: 4020 mV

Current: 0 mA

Temperature: 34 C

BBU Firmware Status:

  Charging Status              : None

  Voltage                      : OK

  Temperature                  : OK

  Learn Cycle Requested        : No

  Learn Cycle Active           : No

  Learn Cycle Status           : OK

  Learn Cycle Timeout          : No

  I2c Errors Detected          : No

  Battery Pack Missing         : No

  Battery Replacement required : No

  Remaining Capacity Low       : No

  Periodic Learn Required      : No

Battery state:

GasGuageStatus:

  Fully Discharged        : No

  Fully Charged           : Yes

  Discharging             : Yes

  Initialized             : Yes

  Remaining Time Alarm    : No

  Remaining Capacity Alarm: No

  Discharge Terminated    : No

  Over Temperature        : No

  Charging Terminated     : No

  Over Charged            : No

Relative State of Charge: 100 %

Charger System State: 49168

Charger System Ctrl: 0

Charging current: 0 mA

Absolute state of charge: 61 %

Max Error: 2 %

Exit Code: 0x00

Logical Drives Information:

==========================

Virtual Disk: 0 (Target Id: 0)

Name:

RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0

Size:278.464 GB

State: Optimal

Stripe Size: 128 KB

Number Of Drives:2

Span Depth:1

Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU

Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU

Access Policy: Read/Write

Disk Cache Policy: Disabled

Encryption Type: None

Virtual Disk: 1 (Target Id: 1)

Name:

RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0

Size:278.464 GB

State: Optimal

Stripe Size: 128 KB

Number Of Drives:2

Span Depth:1

Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU

Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU

Access Policy: Read/Write

Disk Cache Policy: Disabled

Encryption Type: None

Physical Disks Information:

==========================

Slot Number: 0

Device Id: 0

Sequence Number: 2

Media Error Count: 0

Other Error Count: 0

Predictive Failure Count: 0

Last Predictive Failure Event Seq Number: 0

PD Type: SAS

Raw Size: 279.396 GB [0x22ecb25c Sectors]

Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]

Coerced Size: 278.464 GB [0x22cee000 Sectors]

Firmware state: Online

SAS Address(0): 0x5000cca00aa71375

SAS Address(1): 0x0

Connected Port Number: 0(path0)

Inquiry Data: IBM-ESXSCBRCA300C3ETS0 NC370PDXYWGBECCXSA370

FDE Capable: Not Capable

FDE Enable: Disable

Secured: Unsecured

Locked: Unlocked

Foreign State: None

Device Speed: Unknown

Link Speed: 3.0Gb/s

Media Type: Hard Disk Device

Slot Number: 1

Device Id: 1

Sequence Number: 2

Media Error Count: 0

Other Error Count: 0

Predictive Failure Count: 0

Last Predictive Failure Event Seq Number: 0

PD Type: SAS

Raw Size: 279.396 GB [0x22ecb25c Sectors]

Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]

Coerced Size: 278.464 GB [0x22cee000 Sectors]

Firmware state: Online

SAS Address(0): 0x5000cca00aa98a71

SAS Address(1): 0x0

Connected Port Number: 1(path0)

Inquiry Data: IBM-ESXSCBRCA300C3ETS0 NC370PDY07H1ECCXSA370

FDE Capable: Not Capable

FDE Enable: Disable

Secured: Unsecured

Locked: Unlocked

Foreign State: None

Device Speed: Unknown

Link Speed: 3.0Gb/s

Media Type: Hard Disk Device

Slot Number: 2

Device Id: 2

Sequence Number: 2

Media Error Count: 0

Other Error Count: 0

Predictive Failure Count: 0

Last Predictive Failure Event Seq Number: 0

PD Type: SAS

Raw Size: 279.396 GB [0x22ecb25c Sectors]

Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]

Coerced Size: 278.464 GB [0x22cee000 Sectors]

Firmware state: Online

SAS Address(0): 0x5000cca00aa97b4d

SAS Address(1): 0x0

Connected Port Number: 2(path0)

Inquiry Data: IBM-ESXSCBRCA300C3ETS0 NC370PDY06GTECCXSA370

FDE Capable: Not Capable

FDE Enable: Disable

Secured: Unsecured

Locked: Unlocked

Foreign State: None

Device Speed: Unknown

Link Speed: 3.0Gb/s

Media Type: Hard Disk Device

Slot Number: 3

Device Id: 3

Sequence Number: 2

Media Error Count: 0

Other Error Count: 0

Predictive Failure Count: 0

Last Predictive Failure Event Seq Number: 0

PD Type: SAS

Raw Size: 279.396 GB [0x22ecb25c Sectors]

Non Coerced Size: 278.896 GB [0x22dcb25c Sectors]

Coerced Size: 278.464 GB [0x22cee000 Sectors]

Firmware state: Online

SAS Address(0): 0x5000cca00aacf7cd

SAS Address(1): 0x0

Connected Port Number: 3(path0)

Inquiry Data: IBM-ESXSCBRCA300C3ETS0 NC370PDY23XBECCXSA370

FDE Capable: Not Capable

FDE Enable: Disable

Secured: Unsecured

Locked: Unlocked

Foreign State: None

Device Speed: Unknown

Link Speed: 3.0Gb/s

Media Type: Hard Disk Device

admin:

It looks like you have 4 300GB drives which meets the requirements.

This looks to be speced IBM 7845I3 which is fully supported, so you are good to go.

HTH,

Chris

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: