cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1588
Views
0
Helpful
3
Replies

Unity Connection Ports in BE6K

Ryan Espedido
Level 1
Level 1

Hi,

We need to maximize the 24 ports of Unity Connection in BE6000. Currently, we can only configure up to 8 ports.

I found that this is a bug in Unity Connection. Just want to verify if this is true also if the below link will solve the problem:

http://www.gossamer-threads.com/lists/cisco/voip/168043

Regards,

Ryan

1 Accepted Solution

Accepted Solutions

Anil Verma
Level 5
Level 5

No, the changing of the CPU on the BE6K is not supported.

You are running into a defect - CSCud86448

You have two choices, get  patch from Cisco TAC or download and install a COP file.

The COP file is called License Patch COP file and can be found here -

http://software.cisco.com/download/release.html?mdfid=284603371&softwareid=282204704&release=COP-Files&relind=AVAILABLE&rellifecycle=&reltype=latest

View solution in original post

3 Replies 3

Anil Verma
Level 5
Level 5

No, the changing of the CPU on the BE6K is not supported.

You are running into a defect - CSCud86448

You have two choices, get  patch from Cisco TAC or download and install a COP file.

The COP file is called License Patch COP file and can be found here -

http://software.cisco.com/download/release.html?mdfid=284603371&softwareid=282204704&release=COP-Files&relind=AVAILABLE&rellifecycle=&reltype=latest

Ryan,

That link was replaced with new information. Please see Anil's latest post. Sorry for the confusion.

Hope that helps,

Kelli Glass

Moderator for the Cisco Collaboration Community