08-22-2008 02:16 AM - edited 03-18-2019 09:30 PM
Hi,
Recently we implemented Storage Limits in Exchange for all staff. Since then if anyone has exceeded their limits, they are prompted when they access their voicemail that they sotage linit is full. I am going to change the following in the attachments below to disable.
Is there anything else I should check.
Thanks a million.
Anthony.
Solved! Go to Solution.
08-22-2008 05:27 AM
Hi Anthony,
I would have a look at this thread with nice answers from Jeff and Keith from Cisco;
Hope this helps!
Rob
08-22-2008 05:10 AM
Hi,
I have made these two changes and staff are still getting this message "Hello, Your inbox is almost full"
The Version of Unity is: Cisco Unity 4.0 Build 4.0(5)
Any help will be much appreciated.
Thanks,
Anthony.
08-22-2008 05:27 AM
Hi Anthony,
I would have a look at this thread with nice answers from Jeff and Keith from Cisco;
Hope this helps!
Rob
08-25-2008 02:31 AM
Hi Rob,
Thanks a million for this, I used the registry key and this worked. I have to disable the disable funtion.
Thanks Again
Anthony.
08-25-2008 04:32 AM
Hi Anthony,
You are most welcome :) I'ts always nice when you get an answer straight from those two gurus!
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide