cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1840
Views
0
Helpful
6
Replies

Upgrading CUCM, Unity, and IM&P from 10.5 to 11.0

fdouble08
Beginner
Beginner

I am in the process of preforming the standard upgrade from version 10.5 to 11.0. 

As the upgrade files are not generally available in the normal software download areas ( they tell you to use PUT ), I ordered them through PUT.  I received the files via eDelivery and the UCSInstall iso works fine for the standard upgrades done on the CUCM & Unity Connection servers.  However, via eDelivery I received "Bootable_UCSInstall_CUP_11.0.1.10000-6.sgn.iso" which I was told to use for the upgrade.  However, when I did this, I got the "Name does nto match any filter pattern" response from my Cisco IM&P server. 

Has anyone else run into this and was able to resolve?

1 Accepted Solution

Accepted Solutions

Hmm that is quite interesting and thanks for updating the forum, it will definitely others. Looks like it is something new that they have introduced with v11 but anyways nyc to know your issue got resolved.

Regards

Deepak

View solution in original post

6 Replies 6

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

Are you sure you're pointing to the right TFTP/directory, the file should be recognized, and it should show it without the bootable part in the file name

HTH

java

if this helps, please rate