cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
675
Views
0
Helpful
1
Replies
delacruze
Beginner

3rd-patry HP servers for virtualization (blade or rack mounted?)

I have heard from some that for 3rd party servers, Cisco only supports HPs that are blade chassis.  From the Cisco Wiki, it states that blade OR rack mounted work.   Who is right?

A third of the way down in this link it states both would be sufficient as long as it contains the supported hardware (CPU, RAM, etc).

http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22

1 ACCEPTED SOLUTION

Accepted Solutions
Rob Huffman
Hall of Fame Community Legend

Hi Eric,

Rack mount or Blade servers from HP are both supported

any HP server or IBM server is supported as long as:

From your link as well.

Cheers!

Rob

"And if I should fall behind
Wait for me" - Springsteen

View solution in original post

1 REPLY 1
Rob Huffman
Hall of Fame Community Legend

Hi Eric,

Rack mount or Blade servers from HP are both supported

any HP server or IBM server is supported as long as:

From your link as well.

Cheers!

Rob

"And if I should fall behind
Wait for me" - Springsteen

Create
Recognize Your Peers
Content for Community-Ad