Accepted Solutions
No, when you initiate transfer or conference it is always initiated on the same line hence you need ephone-dns to be at least dual-line.
From config guide:
Dual-Line
A dual-line directory number has the following characteristics:
•
Has one voice port with two channels.
•Supported on IP phones that are running SCCP; not supported on IP phones that are running SIP.
•Can make two call connections at the same time using one phone line button. A dual-line directory number has two channels for separate call connections.
•Can have one number or two numbers (primary and secondary) associated with it.
•Should be used for a directory number that needs to use one line button for features like call waiting, call transfer, or conferencing.
•Cannot be used for lines that are dedicated to intercom, paging, message-waiting indicator (MWI), loopback, and music-on-hold (MOH) feed sources.
•Can be combined with single-line directory numbers on the same phone.
You should be able to play with huntstop channel options to control how many calls are allowed for inbound:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_h1ht.html#wp1023551
Below is link to CME admin guide for more details:
HTH, please rate all usful posts!
Chris
No, when you initiate transfer or conference it is always initiated on the same line hence you need ephone-dns to be at least dual-line.
From config guide:
Dual-Line
A dual-line directory number has the following characteristics:
•Has one voice port with two channels.
•Supported on IP phones that are running SCCP; not supported on IP phones that are running SIP.
•Can make two call connections at the same time using one phone line button. A dual-line directory number has two channels for separate call connections.
•Can have one number or two numbers (primary and secondary) associated with it.
•Should be used for a directory number that needs to use one line button for features like call waiting, call transfer, or conferencing.
•Cannot be used for lines that are dedicated to intercom, paging, message-waiting indicator (MWI), loopback, and music-on-hold (MOH) feed sources.
•Can be combined with single-line directory numbers on the same phone.
You should be able to play with huntstop channel options to control how many calls are allowed for inbound:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_h1ht.html#wp1023551
Below is link to CME admin guide for more details:
HTH, please rate all usful posts!
Chris
