cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
678
Views
0
Helpful
4
Replies

7912 Lost DHCP config & change to Fallback mode

arnoldguo
Level 1
Level 1

Recently,I found some 7912(7912G-A) will lost all of their DHCP config suddenly(include DHCP server & tftp server and gw ip),and change to Fallback mode,after restart the 7912,it will be ok.I think the network is fine since the computer connect to the ip phone is no problem.What's the problem,is in ipphone or DHCP server?

4 Replies 4

Not applicable

you capture a sniffer trace off the back of the 7912. You may download a free sniffer pease install it on a laptop or PC that is

connected to the back of the 7912. Start capturing and reset the phone so you can see the process that it follows to request and accept the DHCP packets from the servers to find out if ther is any issues in getting the DHCP ip address

israel.roybal
Level 1
Level 1

I am having this same problem, where you able to solve it?

abdul ilyas
Level 1
Level 1

Seems to be same issue here as well. Any pointers please.

-Thankyou

w.alalami
Level 1
Level 1

i got cisco 870 router, it loses dhcp configuration only every time, without restart or any change in the network.

 

any solution?

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: