cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
2696
Views
0
Helpful
2
Replies
jameskuder
Beginner

7962G Messages Button will not access voicemail

I have a 7962G that iCs running 9.3(1.1S) firmware on CUCM 8.6

When you press the messages button, the phone does nothing and you do not access voicemail. I am able to dial the voicemail pilot directly from that phone and access the mailbox just fine. I have tried performing a factory reset on the phone, but get the same result. Everything I have tried do not affect the functionality of this button.

1 ACCEPTED SOLUTION

Accepted Solutions
Rob Huffman
Hall of Fame Community Legend

Hey James,

The first place to check is the Voicemail profile that is set on the DN

page of this 7962 in CUCM.

The relationship between the Message button and the VM profile is  shown

in the section of the doc below;

Voice-Mail Profile Configuration

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b05vmprf.html

Cheers!

Rob

"Why not help one another on the way" - Bob Marley

View solution in original post

2 REPLIES 2
Rob Huffman
Hall of Fame Community Legend

Hey James,

The first place to check is the Voicemail profile that is set on the DN

page of this 7962 in CUCM.

The relationship between the Message button and the VM profile is  shown

in the section of the doc below;

Voice-Mail Profile Configuration

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b05vmprf.html

Cheers!

Rob

"Why not help one another on the way" - Bob Marley

View solution in original post

Thanks Rob!

Content for Community-Ad

Spotlight Awards 2021