Dear,all
I think "DNRestricted=1" is not good "DNRestricted=0" is good.
Please tell me the meaning of this "DNrestricted" flag.
Also, please tell us what may happen in each state.
Is there something wrong with LineDisplayName = 80352510 ?
Best regards！
2012/09/16 00:46:44.251| 005| SdlSig | CtiDbDnRes | ready | CTIDeviceLineMgr(5,200,18,1) | CTIDbAccess(5,200,19,1) | (5,200,15,1).3926410-(*:10.217.3.133) | [R:HP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0]dnCount=1 CtiAsyncResponseId=105922 DN Array= Pattern:displayName:LineId:callLimit:busyTrigger=:Partition 80352510::287:2:1:onnet
2012/09/16 00:46:44.251| 005| SdlSig | DeviceGetLinesFetchRes | ready | CTIHandler(5,200,16,68) | CTIDeviceLineMgr(5,200,18,1) | (5,200,15,1).3926410-(*:10.217.3.133) | [R:NP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0]Async Response=288 Count=1 Result=0 LineDir:LineDirName:LineIdNumber:LineInstance:MaxNumCalls:BusyTrigger:Partition=80352510::287:1:2:1:onnet
2012/09/16 00:46:44.251| 005| AppInfo | | | CTIHandler(5,200,16,68) | | | [CTI-APP] [CTIHandler::OutputCtiMessage ] CTI GetLineInfoFetchResponse ( seq#=288 result=0 DH=0|1 Line Count=1bMore =0 LineDisplayName=80352510 DNRestricted=1)
2012/09/16 01:32:31.160| 005| SdlSig | CtiDbDnRes | ready | CTIDeviceLineMgr(5,200,18,1) | CTIDbAccess(5,200,19,1) | (5,200,15,1).3932857-(*:10.217.3.133) | [R:HP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0]dnCount=1 CtiAsyncResponseId=107489 DN Array= Pattern:displayName:LineId:callLimit:busyTrigger=:Partition 80352510::287:2:1:onnet
2012/09/16 01:32:31.161| 005| SdlSig | DeviceGetLinesFetchRes | ready | CTIHandler(5,200,16,69) | CTIDeviceLineMgr(5,200,18,1) | (5,200,15,1).3932857-(*:10.217.3.133) | [R:NP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0]Async Response=288 Count=1 Result=0 LineDir:LineDirName:LineIdNumber:LineInstance:MaxNumCalls:BusyTrigger:Partition=80352510::287:1:2:1:onnet
2012/09/16 01:32:31.161| 005| AppInfo | | | CTIHandler(5,200,16,69) | | | [CTI-APP] [CTIHandler::OutputCtiMessage ] CTI GetLineInfoFetchResponse ( seq#=288 result=0 DH=0|1 Line Count=1bMore =0 LineDisplayName=80352510 DNRestricted=1)
2012/09/16 04:50:05.667| 005| SdlSig | CtiDbDnRes | ready | CTIDeviceLineMgr(5,200,18,1) | CTIDbAccess(5,200,19,1) | (5,200,15,1).287-(*:10.217.3.133) | [R:HP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0]dnCount=1 CtiAsyncResponseId=89 DN Array= Pattern:displayName:LineId:callLimit:busyTrigger=:Partition 80352510::287:2:1:onnet
2012/09/16 04:50:05.667| 005| SdlSig | DeviceGetLinesFetchRes | ready | CTIHandler(5,200,16,1) | CTIDeviceLineMgr(5,200,18,1) | (5,200,15,1).287-(*:10.217.3.133) | [R:NP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0]Async Response=285 Count=1 Result=0 LineDir:LineDirName:LineIdNumber:LineInstance:MaxNumCalls:BusyTrigger:Partition=80352510::287:1:2:1:onnet
2012/09/16 04:50:05.667| 005| AppInfo | | | CTIHandler(5,200,16,1) | | | [CTI-APP] [CTIHandler::OutputCtiMessage ] CTI GetLineInfoFetchResponse ( seq#=285 result=0 DH=0|1 Line Count=1bMore =0 LineDisplayName=80352510 DNRestricted=0)
2012/09/16 04:50:14.030| 005| SdlSig | CtiLineOpenLineReq | ready | CTIHandler(5,200,16,1) | CTIHandler(5,200,16,1) | (5,200,15,1).6268-(*:10.217.3.133) | [R:NP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0] mAsyncResponse = 6266 Name=SEP00215555051D LH=0|0 Line=80352510 Partition=onnet TimeOut=5 FilterBitmap=0x27ffbbf Auto Accept Status=0
2012/09/16 04:50:14.030| 005| SdlSig | CtiLineOpenLineReq | ready | CTIDeviceLineMgr(5,200,18,1) | CTIHandler(5,200,16,1) | (5,200,15,1).6268-(*:10.217.3.133) | [R:NP - HP: 0, NP: 0, LP: 0, VLP: 0, LZP: 0 DBP: 0] mAsyncResponse = 6266 Name=SEP00215555051D LH=0|0 Line=80352510 Partition=onnet TimeOut=5 FilterBitmap=0x27ffbbf Auto Accept Status=0
2012/09/16 04:50:14.030| 005| AppInfo | | | CTIDeviceLineMgr(5,200,18,1) | | | [CTI-APP] [Line(1565)::start_openLine] (Signal=CtiLineOpenLineReq State=lineState_waitForRegister LineNumber=80352510, LineHandle: CtiID=5:LineID=1565, LineRequestTimeout=5)
