02-02-2013 02:18 AM - edited 03-19-2019 06:12 AM
Hello, i have work to buy new phones in organization. But 7900 not selling now, how i see. How i can add new types phones to my CUCM.
Thanks!
Solved! Go to Solution.
02-04-2013 05:27 AM
Hi Dmitry,
The "G" in the suffix of these models (like 7941G) stands for Global. The
"GE" in the 7941G-GE stands for "Gigabit ethernet" as it is a 10/100/1000
model.
Keep in mind that there are 7900 models like the 7945G/65G and
7942G/62G that are not End of Sale or End of Life and can be added to
CCM 4.2(3) with the installation of a Device Pack like the one shown below;
Cisco Unified CallManager Device Package 4.2.3(60.0) includes the following firmware versions:
Firmware | 4.2(3)Devpack 60 |
Analog Access WS-X6624 | A00204000013 / A0034322 |
Digital Access WS-X6608 | D00404000032 / D0054322 |
Conference Bridge WS-X6608 | C00104000003 / C002E031 |
Media Termination Point WS-X6608 | M00104000006 / M002E031 |
ATA18X | ATA030204SCCP090202A |
7915-12 Button Extension Module | B015-1-0-3 |
7915-24 Button Extension Module | B015-1-0-3 |
7916-12 Button Extension Module | B016-1-0-3 |
7916-24 Button Extension Module | B016-1-0-3 |
IP Phone 7902g | CP7902080002SCCP060817A |
IP Phone 7905g | CP7905080003SCCP070409A |
IP Phone 7906G/11 | SCCP11.8-4-4S |
IP Phone 7912g | CP7912080003SCCP070409A |
IP Phone 7920 | cmterm_7920.4.0-03-02 |
IP Phone 7921g | CP7921G-1.3.2 |
P Phone 7925g | CP7925G-1.3.2 |
IP Phone 7935 | P00503021900 |
IP Phone 7936 | cmterm_7936.3-3-20-0 |
IP Phone 7937 | apps37sccp.1-3-3-0 |
IP Phone 7941/7961 | SCCP41.8-4-4S |
IP Phone 7941G/7961G | SCCP41.8-4-4S |
IP Phone 7942/7962 | SCCP42.8-4-4S |
IP Phone 7945/7965 | SCCP45.8-4-4S |
IP Phone 7970/7971 | SCCP70.8-4-4S |
IP Phone 7975 | SCCP75.8-4-4S |
IP Phone 7985 | cmterm_7985.4-1-7-0 |
IP Phone 7960 | P00308010100 |
IP Phone 7940 | P00308010100 |
7914 14-Button Line Expansion Module | S00105000400 |
http://www.cisco.com/web/software/282074299/26745/ciscocm.4-2-3-DevPack-60_readme.html
Available via this path;
Unified Communications Manager/CallManager Device Packages-4.2(3.60) |
Cheers!
Rob
"Clocks go slow in a place of work
Minutes drag and the hours jerk"
-The Clash
02-02-2013 03:13 AM
Hi, the 7942's do not yet have an end-of-sale. Is that device type not present in your configuration?
Anyhow, I would suggest an upgrade of CUCM, 4.x is way too old to support the newest phones.
Regards,
Erik
Sent from Cisco Technical Support iPad App
02-02-2013 04:25 AM
Thank you for answer. Yes CUCM need upgrade, but organization no ready pay money for that. I see 7942 support my CUCM. May be you can advise me analogue 7912 ? I see buying 7911G , i have present in CUCM 7911 they analogue ?
02-02-2013 04:35 AM
Yes, 7911 are similar to 7912 (slightly better).If you see 7911 in CUCM and are able to buy them, go ahead!
Regards,
Erik
Sent from Cisco Technical Support iPad App
02-02-2013 05:45 AM
ok, 7911 and 7911G similar ? Just i see on my CUCM 7911, but sell 7911G
02-02-2013 06:01 AM
Yes, they are the same.
Regards,
Erik
Sent from Cisco Technical Support iPad App
02-02-2013 08:19 AM
thank you very much
02-02-2013 08:22 AM
If you like my feedback; dont' forget to rate the posts
02-03-2013 01:49 AM
ok
02-03-2013 09:11 AM
Keep in mind that 7911 are EOS as well:
Chris
02-03-2013 11:10 PM
Sad. Another question. All phones with prefix G analogue phones without prefix? I see in CUCM 7941 and 7941G-GE.
02-04-2013 05:27 AM
Hi Dmitry,
The "G" in the suffix of these models (like 7941G) stands for Global. The
"GE" in the 7941G-GE stands for "Gigabit ethernet" as it is a 10/100/1000
model.
Keep in mind that there are 7900 models like the 7945G/65G and
7942G/62G that are not End of Sale or End of Life and can be added to
CCM 4.2(3) with the installation of a Device Pack like the one shown below;
Cisco Unified CallManager Device Package 4.2.3(60.0) includes the following firmware versions:
Firmware | 4.2(3)Devpack 60 |
Analog Access WS-X6624 | A00204000013 / A0034322 |
Digital Access WS-X6608 | D00404000032 / D0054322 |
Conference Bridge WS-X6608 | C00104000003 / C002E031 |
Media Termination Point WS-X6608 | M00104000006 / M002E031 |
ATA18X | ATA030204SCCP090202A |
7915-12 Button Extension Module | B015-1-0-3 |
7915-24 Button Extension Module | B015-1-0-3 |
7916-12 Button Extension Module | B016-1-0-3 |
7916-24 Button Extension Module | B016-1-0-3 |
IP Phone 7902g | CP7902080002SCCP060817A |
IP Phone 7905g | CP7905080003SCCP070409A |
IP Phone 7906G/11 | SCCP11.8-4-4S |
IP Phone 7912g | CP7912080003SCCP070409A |
IP Phone 7920 | cmterm_7920.4.0-03-02 |
IP Phone 7921g | CP7921G-1.3.2 |
P Phone 7925g | CP7925G-1.3.2 |
IP Phone 7935 | P00503021900 |
IP Phone 7936 | cmterm_7936.3-3-20-0 |
IP Phone 7937 | apps37sccp.1-3-3-0 |
IP Phone 7941/7961 | SCCP41.8-4-4S |
IP Phone 7941G/7961G | SCCP41.8-4-4S |
IP Phone 7942/7962 | SCCP42.8-4-4S |
IP Phone 7945/7965 | SCCP45.8-4-4S |
IP Phone 7970/7971 | SCCP70.8-4-4S |
IP Phone 7975 | SCCP75.8-4-4S |
IP Phone 7985 | cmterm_7985.4-1-7-0 |
IP Phone 7960 | P00308010100 |
IP Phone 7940 | P00308010100 |
7914 14-Button Line Expansion Module | S00105000400 |
http://www.cisco.com/web/software/282074299/26745/ciscocm.4-2-3-DevPack-60_readme.html
Available via this path;
Unified Communications Manager/CallManager Device Packages-4.2(3.60) |
Cheers!
Rob
"Clocks go slow in a place of work
Minutes drag and the hours jerk"
-The Clash
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: