cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2175
Views
25
Helpful
11
Replies
Highlighted
Beginner

Add new type phones CUCM 4.2

Hello, i have work to buy new phones in organization. But 7900 not selling now, how i see. How i can add new types phones to my CUCM.

Thanks!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Community Legend

Add new type phones CUCM 4.2

Hi Dmitry,

The "G" in the suffix of these models (like 7941G) stands for Global. The

"GE" in the 7941G-GE stands for "Gigabit ethernet" as it is a 10/100/1000

model.

Keep in mind that there are 7900 models like the 7945G/65G and

7942G/62G that are not End of Sale or End of Life and can be added to

CCM 4.2(3) with the installation of a Device Pack like the one shown below;

Firmware Versions

Cisco Unified CallManager Device Package 4.2.3(60.0) includes the following firmware versions:

Firmware

4.2(3)Devpack   60

Analog Access   WS-X6624

A00204000013   / A0034322

Digital Access   WS-X6608

D00404000032   / D0054322

Conference Bridge WS-X6608

C00104000003   / C002E031

Media Termination   Point WS-X6608

M00104000006   / M002E031

ATA18X

ATA030204SCCP090202A

7915-12 Button   Extension Module

B015-1-0-3

7915-24 Button   Extension Module

B015-1-0-3

7916-12 Button   Extension Module

B016-1-0-3

7916-24 Button   Extension Module

B016-1-0-3

IP Phone 7902g

CP7902080002SCCP060817A

IP Phone 7905g

CP7905080003SCCP070409A

IP Phone 7906G/11

SCCP11.8-4-4S

IP Phone 7912g

CP7912080003SCCP070409A

IP Phone 7920

cmterm_7920.4.0-03-02

IP Phone 7921g

CP7921G-1.3.2

P Phone 7925g

CP7925G-1.3.2

IP Phone 7935

P00503021900

IP Phone 7936

cmterm_7936.3-3-20-0

IP Phone 7937

apps37sccp.1-3-3-0

IP Phone 7941/7961

SCCP41.8-4-4S

IP Phone   7941G/7961G

SCCP41.8-4-4S

IP Phone 7942/7962

SCCP42.8-4-4S

IP Phone 7945/7965

SCCP45.8-4-4S

IP Phone 7970/7971

SCCP70.8-4-4S

IP Phone 7975

SCCP75.8-4-4S

IP Phone 7985

cmterm_7985.4-1-7-0

IP Phone 7960

P00308010100

IP Phone 7940

P00308010100

7914 14-Button Line   Expansion Module

S00105000400

http://www.cisco.com/web/software/282074299/26745/ciscocm.4-2-3-DevPack-60_readme.html

Available via this path;

Unified Communications Manager/CallManager Device Packages-4.2(3.60)

Cheers!

Rob

"Clocks go slow in a place of work
Minutes drag and the hours jerk" 

-The Clash

View solution in original post

11 REPLIES 11
Highlighted
Contributor

Re: Add new type phones CUCM 4.2

Hi, the 7942's do not yet have an end-of-sale. Is that device type not present in your configuration?

Anyhow, I would suggest an upgrade of CUCM, 4.x is way too old to support the newest phones.

Regards,
Erik

Sent from Cisco Technical Support iPad App

Highlighted
Beginner

Re: Add new type phones CUCM 4.2

Thank you for answer. Yes CUCM need upgrade, but organization no ready pay money for that. I see 7942 support my CUCM. May be you can advise me analogue 7912 ? I see buying 7911G , i have present in CUCM 7911 they analogue ?

Highlighted
Contributor

Re: Add new type phones CUCM 4.2

Yes, 7911 are similar to 7912 (slightly better).If you see 7911 in CUCM and are able to buy them, go ahead!

Regards,
Erik

Sent from Cisco Technical Support iPad App

Highlighted
Beginner

Re: Add new type phones CUCM 4.2

ok, 7911 and 7911G similar ? Just i see on my CUCM 7911, but sell 7911G

Highlighted
Contributor

Re: Add new type phones CUCM 4.2

Yes, they are the same.

Regards,
Erik

Sent from Cisco Technical Support iPad App

Highlighted
Beginner

Re: Add new type phones CUCM 4.2

thank you very much

Highlighted
Contributor

Re: Add new type phones CUCM 4.2

If you like my feedback; dont' forget to rate the posts

Beginner

Re: Add new type phones CUCM 4.2

ok

Highlighted
Hall of Fame Master

Add new type phones CUCM 4.2

Highlighted
Beginner

Re: Add new type phones CUCM 4.2

Sad. Another question. All phones with prefix G analogue phones without prefix? I see in CUCM  7941 and 7941G-GE.

Highlighted
Hall of Fame Community Legend

Add new type phones CUCM 4.2

Hi Dmitry,

The "G" in the suffix of these models (like 7941G) stands for Global. The

"GE" in the 7941G-GE stands for "Gigabit ethernet" as it is a 10/100/1000

model.

Keep in mind that there are 7900 models like the 7945G/65G and

7942G/62G that are not End of Sale or End of Life and can be added to

CCM 4.2(3) with the installation of a Device Pack like the one shown below;

Firmware Versions

Cisco Unified CallManager Device Package 4.2.3(60.0) includes the following firmware versions:

Firmware

4.2(3)Devpack   60

Analog Access   WS-X6624

A00204000013   / A0034322

Digital Access   WS-X6608

D00404000032   / D0054322

Conference Bridge WS-X6608

C00104000003   / C002E031

Media Termination   Point WS-X6608

M00104000006   / M002E031

ATA18X

ATA030204SCCP090202A

7915-12 Button   Extension Module

B015-1-0-3

7915-24 Button   Extension Module

B015-1-0-3

7916-12 Button   Extension Module

B016-1-0-3

7916-24 Button   Extension Module

B016-1-0-3

IP Phone 7902g

CP7902080002SCCP060817A

IP Phone 7905g

CP7905080003SCCP070409A

IP Phone 7906G/11

SCCP11.8-4-4S

IP Phone 7912g

CP7912080003SCCP070409A

IP Phone 7920

cmterm_7920.4.0-03-02

IP Phone 7921g

CP7921G-1.3.2

P Phone 7925g

CP7925G-1.3.2

IP Phone 7935

P00503021900

IP Phone 7936

cmterm_7936.3-3-20-0

IP Phone 7937

apps37sccp.1-3-3-0

IP Phone 7941/7961

SCCP41.8-4-4S

IP Phone   7941G/7961G

SCCP41.8-4-4S

IP Phone 7942/7962

SCCP42.8-4-4S

IP Phone 7945/7965

SCCP45.8-4-4S

IP Phone 7970/7971

SCCP70.8-4-4S

IP Phone 7975

SCCP75.8-4-4S

IP Phone 7985

cmterm_7985.4-1-7-0

IP Phone 7960

P00308010100

IP Phone 7940

P00308010100

7914 14-Button Line   Expansion Module

S00105000400

http://www.cisco.com/web/software/282074299/26745/ciscocm.4-2-3-DevPack-60_readme.html

Available via this path;

Unified Communications Manager/CallManager Device Packages-4.2(3.60)

Cheers!

Rob

"Clocks go slow in a place of work
Minutes drag and the hours jerk" 

-The Clash

View solution in original post

CreatePlease to create content