cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
321
Views
5
Helpful
3
Replies
Highlighted

Assigning single device profile for multiple phones with different extensions

Hello Guys,

I have a query about assigning a single device profile for multiple phones with different extensions.

CUCM simply creates a device profile with extension mobility privilege that is associated with an end-user, when the user login from the workstation. Also, it is used to disable the phone that is associated with the workstation where the user logs off.

 

Please find the scenario below.

Untitled.png

 

Is there any way to achieve a single device profile in CUCM for multiple phones with different extensions by an end-user? please share your thought here!!!!

 

3 REPLIES 3
Highlighted
VIP Advisor

No that’s not possible. A UDP is tied to a user and have directory number(s) set on it. There is no way that the directory number would change depending on who logs in with the UDP.

BTW you do not need to use a UDP to disable this in logged out state on the phones.
image.png

Please rate all useful posts
Highlighted

 

Thank you Roger for the information, as we tried multiple UDP with single end user is working fine.

But the requirement is to achieve single UDP with multiple extensions by an end user.

if not possible, is there any work around in CUCM perspective. Please advice...

Highlighted

Create one UDP per user and assign any number of directory number(s) that the user should have to it.

Please rate all useful posts
Content for Community-Ad