At CUCM(ver.8), SNMP Community string is not seen

[KoKo.KO]

Hi All, 

I've searched for this problem, but I can't solve it, so I wish for everyone's help.

Im using CUCM(ver8 , specifically 8.5), want to use snmp in this.

However, the created community string does not appear when registering the destination configuration.

('Add new' Click, I've created a new community string, but it doesn't show up.)

How can I make the community string appear?

Is it a function that cannot be used because the version is low?

*What I've done

-snmp agent restart

-When making a community string, check 'apply to all nodes'

-At the CLI,
       Utils snmp config 1/2c community-string add "Community name"

       utils snmp config 1/2c trap add "Trap destination ip add"
 typed this command but labeled it invalid

Thank you for reading this.

[KoKo.KO · Accepted solution]

I solved this problem.
When creating a community string, 'access privileges' is set to 'readwritenotify' and solved.
Maybe it's because I changed access host ip to any.
I've got a lot to check on, ha ha.
Have a great day!