Two calls come from PSTN into bacd,and go into call queue normally repectively, all two agent can ring normally in the first cycle, but after allagentsbusy tone, the second call from PSTN can't get agent ringing, only the first call and ring the agent, at the same time I can see "2 calls in queue" , do we need to do "no huntstop" or "huntstop channel"?
, the second call just in hold pattern
My router is 2811: c2800nm-adventerprisek9_ivs-mz.124-22.YB8.bin
Bacd script as followed:
application
service app-b-acd-aa
paramspace english index 0
paramspace english language en
paramspace english location flash:
param aa-pilot 6000
param max-time-call-retry 600
param service-name app-b-acd
param number-of-hunt-grps 1
param drop-through-option 1
param handoff-string app-b-acd-aa
param max-time-vm-retry 2
param drop-through-prompt _bacd_welcome.au
param second-greeting-time 60
param call-retry-timer 10
param voice-mail 5000
service app-b-acd
param queue-len 2
param aa-hunt1 6200
param number-of-hunt-grps 1
ephone-hunt 1 longest-idle
pilot 6200
list 6221,6222
timeout 10
dial-peer voice 6000 voip
service app-b-acd-aa
incoming called-number 6000$
destination-pattern 6000$
session target ipv4:10.0.01
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
