cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
658
Views
0
Helpful
3
Replies

Backup to sftp using ssh-key aythentication

davidwild
Level 1
Level 1

Is it possible to use ssh-key auth instead of username password?

I have a UCS mediasense installation backing up to SFTP by username and password but I am pressured to use ssh- key.

I cannot find any guides and it seems not to be supported.

Thanks.

2 Accepted Solutions

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

No, you cannot, these are the only options you can use:

utils disaster_recovery device add network device_name path server_name/ip_address username Number_of_backups
device_name mandatory name of the backup device to be added
path mandatory path to retrieve backup device from this
location
server_name mandatory hostname or ip address of the server where
/ip_address the backup file needs to be stored
username mandatory user id to connect to remote machine

Number_of_backups optional Number of backups to store on Network
Directory(default 2)

HTH

java

if this helps, please rate

View solution in original post

Unfortunately there is nothing that can fulfil the kind of requirement you have on Media Sense. There is very limited  CLI access on MediaSense opposed to other UC applications, refer below:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/mediasense/11/User_Guide/CUMS_BK_M5B01864_00_ms-user-guide-11/CUMS_BK_M5B01864_00_ms-user-guide-105_chapter_011.html#CUMS_TP_CD5B3261_00

Regards

Deepak

View solution in original post

3 Replies 3

Jaime Valencia
Cisco Employee
Cisco Employee

No, you cannot, these are the only options you can use:

utils disaster_recovery device add network device_name path server_name/ip_address username Number_of_backups
device_name mandatory name of the backup device to be added
path mandatory path to retrieve backup device from this
location
server_name mandatory hostname or ip address of the server where
/ip_address the backup file needs to be stored
username mandatory user id to connect to remote machine

Number_of_backups optional Number of backups to store on Network
Directory(default 2)

HTH

java

if this helps, please rate

thanks very much for your answer.

just to be clear this is the backup of audio recordings to an SFTP server.

there is nothing in the GUI to use ssh-key and nothing in the cli either?

thanks again

Unfortunately there is nothing that can fulfil the kind of requirement you have on Media Sense. There is very limited  CLI access on MediaSense opposed to other UC applications, refer below:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/mediasense/11/User_Guide/CUMS_BK_M5B01864_00_ms-user-guide-11/CUMS_BK_M5B01864_00_ms-user-guide-105_chapter_011.html#CUMS_TP_CD5B3261_00

Regards

Deepak

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: