01-07-2014 02:39 PM - edited 03-19-2019 07:43 AM
So, my phone template that I used to BAT in my phones has EM enabled on it. I need to set Owner ID, so I wanted to use BAT to disable all of them at once (to be re-enabled when I am done). When I go into Update Phones, I see the 2 check boxes to the left of Enable EM, but they are both unchecked. How do I go about disabling EM on my group of phones?
Solved! Go to Solution.
01-07-2014 02:56 PM
Hi
The first check box means 'modify this setting' - so check that.
The second check box is the setting to configure - so leave that unchecked.
It's like checking next to Calling Search Space, and selecting 'none' if you see what I mean.
... and do it on one phone first to verify you get the correct result!
Aaron
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
01-07-2014 02:56 PM
Hi
The first check box means 'modify this setting' - so check that.
The second check box is the setting to configure - so leave that unchecked.
It's like checking next to Calling Search Space, and selecting 'none' if you see what I mean.
... and do it on one phone first to verify you get the correct result!
Aaron
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: