Hi, Newbie again here, Why would Prime licensing manager suddenly be in demo mode after 2 years of use? All licenses, seem to be gone. Thanks, Sam
Hi, Newbie again here, Why would Prime licensing manager suddenly be in demo mode after 2 years of use? All licenses, seem to be gone. Thanks, Sam
PCD Migration fails with DNS invalid or not reachable though the DNS IP is reachable also DNS record is valid, we are ending up with unsuccessful migration
I am planning to deploy new VMs including CUCM version 14, Unity Connection version 14 and UCCX version 12.5 in a new ESXi envrionment with new support. Because the old solution with BE 6000 M4 is end of life. For CUCM and CUC, the Install with Data ...
Anyone solved this issue when installing Cisco CUCM Version 14 I tried the following versions: 14.0.1.13900-155 and 14.0.1.12900-161 but I get the same and following error. I found some old discussions about this issue without a clear solution.
I have 3 ephone 2 of them have 1010 ,1020 number and I want to make the calls from fxo port comes on both of them so I make a voice hunt group with pilot number 30 , now I want to make barge to this number 30 if any of 1010 or 1020 have call from f...
Hellow guys ,Can someone help me in why the get failed to setup barge in my cisco cme setup ?cme configuration
I am looking for the hardware characteristics RAM, CPU and DISK of the Business Edition UCS C220 M4S appliance, but I didnt find a doc description of the RAM, CPU and DISK of this appliance. Does anyone has an idea?
Hello guys,I want to make cbarge on my ip phone 7945 but it gives me "failed to setup barge" .if anyone has this problem and solved please tell me , here is the configuration of my cme CME configuration
I have a customer who would like to upgrade the Cisco Unified CM from 11.5 to 14, the cluster Cisco Unified CM is installed on the Business Edition. Is it possible to use the Direct Refresh Upgrade mechanism for Cisco Unified CM installed on a Busine...
Hey guys,At our telefony company, we run a Cisco Callmanager. We run all of our customers through this cucm. Now we used to use StarTrinity SIP Tester to test the efficiency of routing and the resilience of our solution. Because of some implications ...
hi guys, i have a customer with cucm cluster ver 10.5 (yep..not a joke). with all certs expired. they dont maintain. only the ipsec cert is valid so the backup works fine. anyways the question is, we are planning on migrating it to 14 or even 15. ...
I'm trying to migrate from a 10.5 Publisher to 14 SU2 using a PCD running 14.0.1.12900-89. I was able to discover the old cluster, create the migration cluster and the migration task. When I go to run the migration, it runs for a while and then err...
To upgrade CUCM version 11, currently what is the stable version 12.5 or 14?
How might a person obtain a copy of Cisco's Prime Collaboration Deployment software/OVA? I need to migrate my existing CUCM 11.5 to 12.0 using the PCD migration tool. For that, I need to find out a bootable IOS image for the Cisco PCD tool. Please ad...
I'm trying to upload a custom cert to my PCD deployment so it shows as secure when I connect via https. I've found some reference documents online from cisco stating that there should be a administration - certificate management section of the web gu...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-18-2024 04:56 PM | ||
04-17-2024 01:06 PM | ||
04-11-2024 03:24 PM | ||
04-09-2024 09:23 AM | ||
04-02-2024 03:27 AM |
User | Count |
---|---|
6 | |
5 | |
4 | |
2 | |
1 |