Unified Communications Infrastructure

Hi, I have a client running CUCM 8.6.2 who needs to add 10 x additional users with 7942G handsets. I am struggling to understand exactly what I need to order in terms of handset  part number and user licence part number to fulfill his request and my ...

HiI have CUCM 8.5 and Voice gateway (cisco 2911) with FXO port and it workCUCM user have number 7XXXI have 600 different outsite number (local GSM or PSTN and international) that all 7XXX user should be abble to callI created number 4XXX numberEach 6...

I have VG204 configured as SIP , SIP trunk is established to CUCM 7.x , Outbound to PSTN calls is not happening but Extension dialing  within CUCM DB is happening. Inbound from PSTN works.. Call manager is not forwarding the calls initiated from vg2...

I am getting this error when I am trying to install Mobility advantage 7.0 on MCS-7825-H4 "unable to find any device of the type needed for this installation type"

Hello, I am configuring CUCM using SIP for a brand new install. I have tried to generate a call using the Cisco 7945G. First I enabled auto-registration and enabled dhcp but no luck. Then I disabled auto-registration and configured the phone with an ...

                   hi everybody,i have a requirement for a voice/ IP telephone of about 1500 phones.which call manager server / mcs hardware model number will support this requirement?i urgently wait for your support.brsam

Good Day,I Have problem in cisco Unity7.0  when i try to send voiceMail the user and after record the messege and then push buttom # to send the Voicemail the user not recieved it or appear any indicature recived Voicemail , when i investegate the Ev...

Hello all,I need help with an issue.A client with a CUCM single node is requesting a quote for a 2nd server so he can have redundancy.While I thought that the MCS hardware should be the exact same in order to have the cluster configured. I just read ...

Is there someone out there that can provide some insight into the inner workings of the License Count Utility Tool?  I'm trying to figure out some of the logic that the tool is using to make it's recommendations and analysis for CUWL, UCL, etc. 

Hi All,I'm running CUCM 8.0.3 and just ran CDR and CMR reports.  CDR reports have dateTimeOrigination field but CMR reports are missing the dateTimeStamp field.  Does anyone know the reason why this important field is missing and how to fix CMR repor...

In the directory listing when you right click on a user and go to Contact --> Status --> Calls, you can see who a user is on the phone with.  How do I disable this or at least hide it from my operators?We are runnig CUEAC client 8.6.2.611.Ryan