Unified Communications Infrastructure

Hello.Please, Can you clarify me the following?1.- Promotion 3&3 include migration from CM 6.1 to 7.1.5?2.- If yes, as I think. How can I order to CISCO the UCL for Enhance Users based on free DLUs not used? Which is the balance, 4 DLUs = 1 Enh User ...

Hi All,Seen a lot of good posts on this and I'm leaning towards the fresh install of 8.0(3) on the new hardware into the same windows domain then using COBRAS/GSM to port the subscribers and data across but I have to following questions:For COBRAS I ...

Are users supposed to be able to see if a person is on the phone in CUPC 8.0?

HiWe recently split our company into two seperate entities. Through this process we ran two domains via an AD trust, also we run our voice systems in parallel. We set up a 'Inter-federation domain' with so we could IM etc the other entity through the...

Hello,I run into an issue with CUPC Mac Client V7.1.  We have a CUPS server running V8.02.  The network domain is local.loc with a host name server1.The Proxy domain for XMPP federation is test.com.  We have a A record set up for server1.local.loc.  ...

Hi ,I don't know what is the best option  , for a user using only  MOC with OCS2007 ,  between CUPS or CUCIMOC solution ?Brgds

Can someone please give me any suggestions on configuring a dialable lead number for a line group? I'd like to be able to setup a DN to forward all to a line group. Any help would be greatly appreciated. CUCM 7.1.3

I'm using CUE 7.0.6 with CME 7.1.I was running the "Cisco Unity Express Initialization Wizard".  Step 2 was "Import CCME Users".  CUE didn't find any user.On CME side, I already configured name and label for ephones.  Why CUE didn't see any user?Than...

   I have a customer who wants the CUPC to be a window that stays on top all other windows.  Is there a way to keep the CUPC in the front at all times?

Hi,  I'm doing a first time upgrade of our Unity server and i'm using Call Manager 4.1.3. It's a single unified messaging server enviroment with 16 ports. The current server is 4.0.5 and here was my thought on how to proceed:Run DBWalker and export d...

HelloI have a Router 1700 running IOS 12.3(7) is a small office with 3 IP phones connecting those phones to our main Call Manager 6.1, the issue is with the incoming calls from the PSTN, the router has a card VIC2-FXO with 2 lines. When someone call ...

Regarding coresident virtual servers and performance, can you tell me how much/many RAM, and vCPUs and physical CPUs are required per CUCM and how much is required per CUCxN server on the UCS-C210M2-VCD2 platform?