Hi,I need to re-program the cucm from the scratch.1.What all factors I need to take in to consideration while doing this.?2. How to back up the licenses? --- as the licence files are mising.Faizal
Hi,I need to re-program the cucm from the scratch.1.What all factors I need to take in to consideration while doing this.?2. How to back up the licenses? --- as the licence files are mising.Faizal
Hi,For the Linksys ATA that using for fax the status is Reject always. So I must reset the ATA Adaptor the status will update to registeredCould you help me to find out the cause of the issue?I attached the status as figure on CUCM in attachement.
Good Day,I had to replace my CUCM 5.1(2) Publisher server after a hardware failure. We installed CUCM restored the backup and re-host the server licenses.After installing the server back into the network, the subscriber server db is not syncing, when...
Hello all,I am looking for some assistance with testing CER 2.0. I have a new system that I would like to test without actually calling 911. I have researched on this forum and found that I can set the system to call my cell phone, but I cannot fin...
My client is using IP communicator which is working propelry from office but when he using CIPC over VPN from Home its registering with CUCM and able to make calls,however he unable to get any voice(no voice communication). When i generating call st...
I have some users who do not like the pop up window thatappears when you have a new call coming into your phone. Is there a way to disable this or move the window to another portion of the screen? When it pops up I tried to move it but it would not ...
Can anyone help me to configure Cisco Unified call Manager with Microsoft Exchange.ThanksIrfan Hussain
Hi:i user mobile 8.0 in IPhone , when loacl Lan register to CUCM(6.1.5) is very nice , but via Wi-Fi(different subnet) or Remote Wi-Fi or 3G(use VPN) can not register to CUCM and IPhone show DisconnectedThanks
I configured everything through the CLI so the first time I logged on to the CUE GUI I selected the 'skip and logoff' option. Now when I try to login I get the lost contact error screen and it will not accept a new username/password.When I do a 'sho...
Hey Experts,I've just received a project plan for a customer that will be migrating from Unity 7 (Primary/Failover setup) to Unity Connection (Active/Active setup). They have chosen, at least at this point, to use their current servers (7835's) for ...
We have problems occassionally where the MWI's will stop working on some lines. Today I found out that they hadn't been working since last week and management is not too happy about it. I see that in other Unity versions you can schedule when the s...
Trying to get CUPC Desk Phone Control working. Everything else seems to be working fine. Logging in, Controlling IP Communicator via CUPC, Searching LDAP directory, etc. I am using CUPS version 7.0.8, CUPC 7.1, CUCM 8.0.3. CUCM is using local use...
Has anyone had trouble selling UC due to the fact that Attendant Console is not being included anymore?
Unity 7.02 maximum message length is approx 30 secs regardless of the settings in sys admin. Has anyone encountered this issue?
Hi,Is it possible to use a single Unity 4.2 for (1) CCM 4.2 and (1) CUCM 7.1 cluster at the same time? For example, splitting the ports to both clusters. We have a large (>30K) VoIP deployment and need to upgrade the Callmanager cluster and Unity, s...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-18-2024 04:56 PM | ||
04-17-2024 01:06 PM | ||
04-11-2024 03:24 PM | ||
04-09-2024 09:23 AM | ||
04-02-2024 03:27 AM |
User | Count |
---|---|
6 | |
5 | |
5 | |
2 | |
1 |