Unified Communications Infrastructure

CUCMBE and SRST over ADSL 4Mbps/768kbps on both ends

Has anybody set up a CUCME or CUCMBE over ADSL link? What I am planning on implementing is a CUCMBE in the main site with SRST on the remote site. In remote site I will have around 20-25 phones. Maximum amout of calls between the site at pick will...

Callmanager 7 CDR issue

i am using callmanager 7 . and in CDR i can not email CSV files.please advise .

Resolved! Problems with accessing Cisco Unity 4.2 Build 4.2(1) from a remote computer via a web browser

Hi,In my "Cisco Unity 4.2 Build 4.2(1)" installation, I can log-in to the cunity1 server (the server with the Cisco Unity 4.2.(1) installed), and on the server, I can open the web-page: http://cunity1/Web/SA/Default.htm, this page opens the page: htt...

CUPC V2 is working with CUPS V7, while CUPC V7 is not

Dear all,We did upgrade for all of our VOIP Enviroment as follows:Call Manager from 5 -> 7Unity from 5->7Presense 6->7and everything is working fine, except the newer version of Cisco unified personal communicator 7 is not able to connect to the pre...

Cisco Unity / Unity Connections question

I have a server (MCS-7835-I2-ECS2) which I was going to install Unity 7 on. We have now decided to go with Unity Connections. Is ther ANY way to make this server work for the install. I simply receive a message that the platform is not supported.A...

node name , is not part of the cluster CRS

Trying to get access where the scripts are, I´m getting the following error "nodename" is not part of the cluster CRS , attached is the screenshot I gathered. Any help on this will be highly appreciated.

Unity Connection Cluster - DNS resolution

It is posible to remove DNS resolution in a cluster AFTER the cluster is set (AKA: both unity Connection were installed using DNS resolution)?Version 7.1Thanks

Recommended CDR and Call Recording software

Greetings,We are an Advance UC partner and are looking for a CDR and Call Recording solution. I've got some recommendations already but I thought others might be able to comment about what works well for them. We focus on customers from 50-500 righ...

Resolved! Unity 7.x Auto Attendant CDR

I have created a AA (https://supportforums.cisco.com/thread/2005563?tstart=0) now that I have created the AA I was asked if CDR can been seen.I checked and I cannot see ANY CDR records from AT&T calls or internal calls, is this an issue with using Vo...

Resolved! System Install DVD Question

I have the System Installation DVD for CUCM 8.0(1). I want to upgrade from CUCM 6.1(3) directly to CUCM 8.0(1).First of all CUCM 8.0.1 isn't available via the Cisco download page. CUCM 8.0(2) is but my servers (MCS-7835-H2-IPC1) aren't currently li...

CUPC and Voicemail Deletion

We are running presense server System version: 7.0.7.10000-11 and CUPC 7.1.1 . We can delete vocie mail from the CUPC but it will not delete from the 7970 phone or exchange. Exchange is 2007 and is on a seperate box. It was working fine when exchange...

Two issues on Unity 7.0(2)

I have 2 issues on my Unity 7.0(2)1. My Bulk Edit hangs up everytime I open it. I tried rebooting the server, but the problem still persists.2.Unity fail-over notification not working. I have setup notification as per http://www.cisco.com/en/US/docs/...

Resolved! Directory handler – Dial extension rather than direct to greeting Unity 5.01

I’m using Unity 5.01. I’m trying to get our directory handler and the “Allow callers to dial an extension during greeting” feature to ring on subscriber’s phone rather than go directly to their voicemail. I can’t find this switch. Does anyone else ...

Getting a Email notification if phone is unplugged

Hi Experts Is it possible to get an email notification when phone is unplugging for more than one hour from the network? We are using CUCM 7 and CUOM Thank you Bawanraj

Upgrade path from Unity / Exchange to Unity Connection 7.1

Has anyone found (perhaps doesn't exist) an upgrade path from Unity / Exchange 4.1 to Unity Connection 7.1?

Unified Communications Infrastructure

Forum Posts

CUCMBE and SRST over ADSL 4Mbps/768kbps on both ends

Callmanager 7 CDR issue

Resolved! Problems with accessing Cisco Unity 4.2 Build 4.2(1) from a remote computer via a web browser

CUPC V2 is working with CUPS V7, while CUPC V7 is not

Cisco Unity / Unity Connections question

node name , is not part of the cluster CRS

Unity Connection Cluster - DNS resolution

Recommended CDR and Call Recording software

Resolved! Unity 7.x Auto Attendant CDR

Resolved! System Install DVD Question

CUPC and Voicemail Deletion

Two issues on Unity 7.0(2)

Resolved! Directory handler – Dial extension rather than direct to greeting Unity 5.01

Getting a Email notification if phone is unplugged

Upgrade path from Unity / Exchange to Unity Connection 7.1

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

I want to know if certain DN's can forwarded with the called number

Cisco attendant console 14.0.2 unable to answer incoming external call

PCCE Finesse 12.6.2

VMware License for BE7M-M5-K9 Servers

Which Unity Connection Trace Do I Need?

Can CUCM be used to route calls between different sites?

MTLS does not take effect

I want add a comment to a voice-port or dial-peer

Cisco C8200 & C8300 Calls Per Second

CUCM 11.5 Overprovisioned