Unified Communications Infrastructure

I'm setting up Unity Connection 7.0 in VMWare (lab environment) and the critical services such as Conversation Manager cannot be activated. Activation status simply says deactivated and there is no button to activate in Cisco Unity Connection Service...

I'm having a problem with a Cisco 2811 UC Bundle. I installed it and immediately upgraded the IOS as well as the CUE to the newer version 7.1. Telephony is working great, however when I tried to activate the mailboxes it tells me that I have no mailb...

Hi all,This is my 1st time to install unity 7.0 in the brand new 7825 server media.And I am having hard time through out the installation Below are the spec: MCS-7825-H4-ECS1Cisco Unity MCS   7825 HP Server1UNITY-PWR-UKPower Cord for   UK, Hong Kong,...

I would like to take the exported information, including controlled devices, for a TAPI account from End Users and import it into the Application Users. Can this be done?

In case of integration between Cisco Call Manager 7.1 and Nortel CS1000M 4.5 and there was PRI for each system Is it possibbe that  In case PRI are full or bad on either side another side should   take care ?

I have a user who needs to be in the directory so when people call after hours they can reach her extension if they do not know it.  However, she does not have a voice mailbox and her position does not need one.  How can I do this?I'm using the follo...

I have a customer who's interested in purchasing and using SIP trunks to a service provider.Consider that this customer has a MPLS network, and they are currently the built in CUCM locations based (hub and spoke) call admission control.Since all loca...

I'm looking to replace a Verint system that is doing server-based recording with Call Mgr 4.1.3. We are going to upgrade to 7.1.x soon.My customer is a CCX CAD/Citrix environment. I see that QM/Calabrio also supports server-based recording.We have a ...

Hi Everyone,I was trying to upgrade the CUE installed package from 3.1 to 3.2.1. But it did not complete successfully and then when I tried to reload the CUE it stuck in halt state and unable to load. I can login in to boot loader mode only. How to r...

is paging supported on cisco call manager and cisco unity for Lotus ?How is the implementation ?