Hello All, Would it be possible to configure that when starting Jabber a pop-up window appears with a customized message? Thanks, Juan
Forum Posts
Hi, We have to add the domain name in CUACA server, at present it has no domain name and is set to default workgroup.CUACA 10.5.2 is having two nodes to provide resiliency. The CUACA registry value in the windows server is all already with server hos...
Hi EveryoneI was know can someone tell me what is the best way to go about getting this done. Currently we have 2 CUCM clusters. My director wants to get rid of the one in the San Jose Ca office and have all the users register to the one in Dallas TX...
Resolved! Speed Dial Call Forwarding
Is there a way to add a call forward all line button that you press which already has the number programmed into that line so once you press it, it will disable/enable the forwarding when needed? CUCM v11.5 Cisco 7965
When we want to configure it and check the connection it says, is in menu Messaging --> external setup --> external databases (in IM Presence Administrator). We use a postgresql server on linux and can connect to the db via other clients as test. Wha...
Hello Guys,I have 2x4431 ISR VGs and couple of PVDM cars available. 4431s have already PVDMs installed (1 on each VG)I would like to see if I have extra slots to install new cards.How can I check that? I do not have physical access to VGs as of today...
Hi All, Our current CUAC version is 11.0.2.10-2 and planned to upgrade this to version 12.0.5. We couldn't find any documents related to Upgrade Procedure. current windows server: Windows Server 2008 R2 (Have a plan to upgrade 2012 R2)current SQL ve...
I've got an issue on multiple CUCM 12.5 clusters (all running System version: 12.5.1.13900-152) When scheduling a recurring Export I cannot set a Job End Time. I get an error: "The date/time you selected is invalid. Please correct the date/time value...
Resolved! CME Sip Trunk
Hello,how many SIP Trunk the Cisco CME can handle?ThanksRegards
Hello Everyone,can someone explain the difference between CUBE14-T-ENH and CUBE14-T-STD to me or does someone know where to find detailed explanation ? THanks in advance. Regards Petra
Hi Team I would like to know if there are any APIs available for the CUCM "Disaster Recovery System" part. The idea is to use APIs and see if we could automate the "Manual Back Up" Process . Thanks in Advance
Hello,I need info about ESXi version upgrade on server BE6000 (UCSC-C220-M4S) ?* For minor release* For major releaseBE6000 have contract running.Can we upgrade to last ESXi version ?Do you have some documentation and/or procedure to upgrade it ?Than...
Hi,we are getting the below events on expressway -e 2021-02-10T14:26:14.648+03:00 traffic_server[7829]: Event="Sending HTTP error response" Status="403" Reason="Forbidden" Dst-ip="104.128.83.98" Dst-port="37247" UTCTime="2021-02-10 11:26:14,648"202...
YPHi, I have a bit of an issue due to Cisco's limited recording options! We have CUCM with 8800 phones & CUBE HA for PSTN access.Requirement is to capture point-to-point, SNR and all forwarded calls to PSTN for given users. I don't think there is any...
Resolved! SSO with CUCM 10.5 and ADFS 3.0
Hello, We recently updated our CUCM/CUPS/CUC system to 10.5 in order to take advantage of the SSO capabilities that are now built in. All of the documentation points to ADFS 2.0, and we have an ADFS 3.0 implementation. I am trying to figure out if ...
