Hi Cisco Engineers,
I would like to know and hear from you about my recommendation in applying the security vulnerabilities on my ip telephony servers.
Please see my attachements about the vulnerabilities name and recommendation
from Microsoft
...
Hi, We have a setup with a nortel PBX connected with 2800 series router through E1 trunk.We configured PVDM 2 16 for 16 channels.We configured dialpeers from router to remote places.Here the problem is when 8 calls is happening at a time 9th call i...
I'm in the process of upgrading a single box of Unity 4.0.5 UM to a new single box of 7.x UM. We are running a single exchange 2003 server.What would be the easiest course of action? I have never set up a unity server before from scratch.
I am working with serveral service providers who are providing SIP trunks and would like to hear experiences about how they integrate with UCCM 6.1 using a CUBE gateway.I am having some difficulties getting DTMF relay and also some ringback working o...
Some questions on unity 5.x VM failover configuration:1. Should the MS exchange server be installed on Pri Unity server, or Sec Unity server or both? 2. Which server should be the Doamin Controller?Thanks!Steve
Meetingplace does not send notifications to external (e.g.yahoo or gmail) IDs when scheduling through the web. Notifications are sent to internal exchange users.Notification to external accounts work fine when scheduling meetings through Outlook.MP 5...
Hello all,I am running Unity VM only 4.0.3 with Exchange2k off-box, and I am running into an issue when trying to access the SA page. I can login to the SA page but when I click on the Subscriber link or the CallHandler link I am getting a "Page can ...
I want to send the audio of meet-me conference to a multicast rtp stream address. Does anybody have any idea how can this be done? There has to be a configuration for this because Cisco do this trick when bridging LMR or even POTS to meet-me confer...
Install fails at the point of post installation database, completes the process to 100% and then comes back with a time exceed - extending time 2 hrs 40 mins. Has anyone seen this error
I'm currently in the process of migrating our old Unity 4.0(5) server to unity 5. To do that I am going to install the new server with the oder version of unity, move the users and then upgrade to 5. Running the CUSPA, I am unable to install MSDE. Af...
Hello,Just a little back ground here. I upgraded CM to 7.0(2) over last weekend. A week before I did the upgrade, I upgraded all the phone firmware to 8-4-4 and upgraded all the voice gateways to 12.4(22)T. All phones functioned fine with the new ...
Looks like other users have reported this problem back in January but no response. I receive the error: "Host not found" on some phones as soon as I select the service from the phone. on Other phones I can see the 4 options joing meeting etc but when...
In the anouncement on Monday, Cisco said that they would look at this as a supported platform. Does the mean that virtualization support is around the corner too? Let me know what you think, we are constantly looking for apps to virtualize and UCM a...
Hi There,I use CUPC 7.0(1) with CUPS 6.0.3 and CUCM 6.1.2. I am able to login to the CUPC but the server health is as follows.Logon Server Connected(Primary)PhoneConfiguration(TFTP) Downloaded(Primary)Presence Connected(Primary)Softphone Connecting(P...
I have Unity 5.0(1) ES70 on server 2003 running Unified. Partner store is Exchange 2003. There are 2 Exchange servers.Every night the Exchange servers run a backup. They are using a method which changes the blocks to 'read only' during the backup so ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
