Dear all We are going to replace our hardware for CUCM Cluster. The CUCM version is 10.5.2，and the hardware type is C220M3S, which will end of support soon. So we are planning to replace them with lastest hardware, BE6000M M5( or C220 M5). Howe...
Hi All, I am trying to configure CUBE for SIP registration with Twilio. the customer wants it to be a encrypted and do not want to use UDP 5060. Cisco 2911 router is used as the cube router. I have enabled IOS router as CA and issued a certificate fo...
I have a customer with a CUCM 10.0(1) cluster. They wish to change the hostname for one of the subscriber entries in the Server section of CUCM application administration to that subscriber's IP address. Does the subscriber need to be reinstalled af...
I'm not sure how to approach this one so any input is appreciated!User A is logged in to Jabber at a different workstation and is not using a phone there. User B is at User A's original workstation and is logged into User A's phone with Extension Mob...
HI All,Getting some issue with CUCM vs Analog/VoIP GW. Also called FXOFXS GW(from PATTON)Indeed, whereas SIP Trunk is up from CUCM to Analog/voIP GW, Analog/FXS users from this GW can not REGISTER on CUCM(they are declared as Third-party SIP advanced...
I have a situation where all calls going out a specific SIP trunk are having all caller ID masked as 703XXXXXXXXXX. (Not happening on other trunks.)
It is not an External Phone Number Mask.It is not a translation pattern, or a field on the Route Patt...
Hello Team,I will perform CUCM minor upgrade from 11.5 SU3 to 11.5SU6I was running ciscocm.preUpgradeCheck-00022.cop.sgn on each node and noticed something, Publisher:*) You have 42 GB of required 25 GB common partition space required toupgrade. Subs...
I’m in need of a new ATA in one of my buildings. Rather than use old ATA-187s I’d like to move forward and get new ones. However, the newest model that I know about, the ATA-191, is already EOL and I can’t buy one in time to get support…March 14, 202...
Customer is asking if we can modify a SIP response code. Specifically, when the CUBE receives a 487 (busy) response, the customer is asking us to return a 503 to the other leg. Is there a way to do this?
Dear all, we setup our Cisco Roomkit devices with presence enabled in CUCM:Service Settings all enabled:Home ClusterEnable User for Unified CM IM and Presence (Configure IM and Presence in the associated UC Service Profile)Include meeting information...
CUCM = 11.5 Avaya Session Manager ------SIP Trunk--------> CUCM -----SIP-----> Cisco SIP Gateway with PSTN. Working Call flow = Avaya H323 IP Phone calls to Cisco SIP phone as an extension, working successfully, vice versa also working successfully.N...
Hello All, I have almost 20 servers with UCOS. which inclued CUCM, CUC, IM & P. I just want to know if there is a way to excute a script to capture the output of set of commands. For Ex: 1. Show status2. Show ntp status.3. Utils service list.
Hi guys, our before used BE6K UCS-Servers will definitely run out of service in november 2020, so no service contract possible anymore after this date.We plan to move our 4 UC-VMs which are CUCM Publisher/Subscriber and IM&P 1&2 (all at the moment on...
