Hi all,i have deployed jabber (cucm 11.5 su3, IMP 11.5 su3), and got error message when try to login (cannot communicate with server), i have followed guidance and verify this :- DNS A record and SRV verified ok- on imp cluster topology verified that...
Forum Posts
Hello All, I would like to know if we can set EMAIL alerts in CUCM (11.5) for failed or successful login attempts. Thank you. Nadeem
I am unable to reach my voice mail or auto attendant, i dial the extension direclty 398 or voice mail of 397 but i get nothing... I have rebooted multiple times, this is the first time this has happened, no updates have been installed i dont know ...
Hi, CUCM: 11.5 We have 802.1x enabled on our phones, all are working. Phones can authenticate with the NAC and can get IP addresses. We are planning to enable Mixed-Mode in our environment and just wondering if there should be done with CAPF certs a...
Resolved! voicemail for hunt pilot
Hello, I have requirement that when someone dials in to the company, reception hunt pilot rings. In no answer case, call should be forwarded to voicemail. The caller has to hear company greeting and after greeting drop his/her message. The dropped m...
Hi fellows, I am a beginner at Collaboration technologies and will really appreciate if you guys can help me out in setting up a voice infrastructure setup at my work project. So we have 2 office sites, one in US and one in Canada (Total of less tha...
Hi Guys,I read some articles that we can query the CUCM database via CLI. But, is it possible to export databases in CUCM to external SQL database? So the external database will be the copy of the CUCM database. I need to compare and sync the CUCM da...
Are there any updated versions of CUCM / Unity that fully support HTML5 and don't attempt to use Java anymore? We are still using the 2015 version CUCM / Unity 11.5 on a BE6000S. It is difficult to use CUCM / Unity because it expects to use Java with...
Hello Everyone,Looking for a little assistance on a lingering issue, we have a mailbox that is linked to an extension number as well as a DID. When a call comes in on the DID (E164 number in the config) the envelope plays the extension number as the ...
Resolved! IM&P critical services?
while checking a customer IM&P health i got this warning in rtmt Service operational status is DOWN.Cisco XCP Directory Service,Cisco XCP File Transfer Manager,Cisco XCP Message Archiver,Cisco XCP XMPP Federation Connection Manager. customer jabber ...
Hi, My Cisco Expressway servers had singed the Godaddy SAN cert. and showed the expired.Now, I am going to renew the cert. on my Expressway Edge server.It allow me to upload the new server cert. and it must also upload the private key, but I have not...
Hello, we seem to be having an issue with the CLID not showing up correctly for our CCB calls and I was hoping someone could shed some light on this for me. We're running CVP 9.0(1) and in our CallbackEntry script we have a Decision node that checks ...
Hi all,I see CUCM voice ports as the calling DN in RTMT trace logs. I am trying to understand how a CUCM voicemail port can be the calling DN of an outbound external call? I don't see any Call handlers that are transferring calls to external numbers...
4 times a week, I have to change the number of call forwarding in "Unified Communication Self Care Portal", Version 11.5.1. In case it's not clear, let me describe it. 1. Open "Unified Communication Self Care Portal" at https://my_cucm.mydomain.com/...
Resolved! CUCM - MTP (Software/Hardware)
Hello, I have about 15 remote sites and 2 data centers. The data-centers both have CUBES that connect to the PSTN via provider SIP trunks. Each remote site also has an SRST. I have always assigned MTP via the MRG list for each site preferring the ...
