Hello,
We had upgraded CUCM from version 10.5 to 11.5. Our support contract is expired so we can't migrate licenses.
Can we install 10.5 version again via "Software Upgrade -> Install/Upgrade" procedure?
I just purchased NFR kit for collaboration v12.x on 3/9/2019. The dilemma I am stuck in is the following:
1. I work for a Cisco gold partner and would like to keep this personal purchase for demo / learning separate from the 'master' smart account f...
Hello all,
I would like to integrate CUCM 10.5 into Cisco ISE for AAA purposes as well as Cisco Prime for monitoring/device management purposes but am not finding much info online about the processes for doing this. I know that CUCM can be used with...
Hi folks,
So my client has several E1's for outgoing and incoming call. They want me to take down the E1/E1's that has no activity at all to save some money.
Is there any command to see which E1 in my voice gateway that has no activity at all? I hav...
I have:Router 2851CME version 7.1Cisco Unity Express version (7.0.5)The config:--------------------!telephony-service max-ephones 5 max-dn 10 ip source-address 10.10.230.1 port 2000 voicemail 3180 max-conferences 8 gain -6 web admin system name admin...
hii would like to integrate CUCM and prense by following this video (https://www.youtube.com/watch?v=AeWz048SjGY) but i'm facing a probelm ; The SIP trunk creeted on cucm is not displayed on standard setting on presence server
i have already make thi...
Hi All,
For my CUCM Cluster i got 2 sip trunks which are directly talking to the service provider IP address.
I can the patterns using the RL contains one RG which contains 2 devices(SIP Trunk) and the algortihm is TopDown.
We can see if we run the...
Hi,We are setting up a Unity 11.5 Active Active cluster with two phone systems (PhoneSystemCUCSUB and PhoneSystemCUCPUB).PhoneSystemCUCSUB will have the ports assigned from CUC SubscriberPhoneSystemCUCPUB will have the ports assigned from CUC Publish...
Hi All,
I'm setting up change windows and upgrading lab etc in preparation to upgrade from CUCM 11.5 SU2 to 11.5 SU5. It kind of occurred to me that it would be a pain to turn right back around and do all of this for SU6 if it's coming up soon. Does ...
We have DSP 1283's and are currently using those for SIP calls. Now we want to add Video conferencing thru SX 80's and cameras. How do we reconnect those so that the DSP in the rooms is still good and that the Video conferencing sounds good too?Mar...
Hello,
We have UCS C260 M2 with firmware version 1.5(7e), and I am trying to upgrade the firmware so we can upgrade the EXSI version as well.
My question is can I upgrade from 1.5(7e) to 1.5(9f) directly or do I need to do intermediate upgrade ?
We have a shared line on multiple phones. Most of the calls on this line are handled by one person. Caller #1 calls in and the call is answered here on phone #1. While on the call another call comes in on the line so Caller #1 is put on hold by th...
As I understood if we need to upgrade CUCM version to 12.x we need to first convert them to Smart Licensing.
If we are moving the customer to Flex Licensing plan do we still need them to first convert to Smart Licensing?
Thanks,
Hi FolksWe are upgrading our CUCM from 10.5.2 to 12.5 very soon. I noticed that the VM hardware version has changed from vm8 to vm13 on the new ova. Until CUCM 12.1 the ova was still using vm8, it is only with 12.5 that it changed to vm13. I understa...
Hi, this is already been asked alot but also most of the answers were not helping. Let me Introduce the Setup:Big Domain (xyz.de) (use skype and stuff)----Company was bought (subdomain xyz2.local) (uses CUCM and IMP/Jabber) Now i want achieve the fol...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
