I currently have a client with approximately 100 machines. Not all of these machines are need the Cisco IP Communicator 8.6.6.0 on their computer. A large majority of the users are on Dell Optiplex 7040, i7, 16GB Ram, 4GB Dedicated Graphics Car...
Hi,We have a client using Cisco Unified CM Administration. The client reports that he used to be able to dial a feature code ##, then the extension number they want to transfer to, and this would go directly to voicemail injstead of ringing. Since th...
Hi Guys,How can I play a "your call is being recorded" announcement on incoming calls?It is only for a small number of extensions (40)The gateways are MGCP (I used a TCL script before to do this on a H323 gateway but changing to H323 is not an option...
Hi,I want to upgrade my CUCM ver 9 to Ver 10.5 and i have licenses installed in it , so i need to know the following1- steps of upgrade process2- Did i need to buy new licenses for ver 10.x ? or only upgrade my licenses ver 9 to ver 10 free ?3- I bo...
Confused by the 11.5 and later SSL certificate requirements. Don't understand what the below means:
Make sure you import a PKCS12 (.pfx or .p12) format signed certificate.
The certificate must contain primecollab alias.
The Key password for primeco...
Hi everyone,
I have a few questions on what the best way to update a CUCM Cluster is.
The cluster is running 10.5.2.12901-1, and i plan to upgrade it to the latest 10.5.2 version (currrently 10.5.2.16901-1). I would also like to install the latest ...
We are running Unity Connection 10.5.2.10000-5 and some of our users access their voice messages through IMAP with Outlook 2013 and 2016. I am receiving complaints regarding the inability to delete messages from Outlook. When attempting to delete a m...
Hi,
I have 1 CUCM Publisher10.5.2.10000-5 and 1 CUC Publisher 10.5.2 in VM environment.
Recently after power failure on site, the server went with error and asked to repair with recovery disk.
I had done the procedure and it was successfully comple...
This is my first UC migration and I'm really stuck.
I added my CUCM 8.6 cluster to Inventory > Clusters. And added my two B6K servers to Inventory > ESXi Hosts.
I am now trying to Define Migration Destination Cluster and I get as far as Step 4 of 4 ...
I have one site in Prime that gives me the "failed to find object" when I synchronize between Prime Infrastructure and Mobility Services Engine. I click on the site, building and floor and it shows me the map and all objects. Does anyone know how t...
I have 2 IP Phones. One of them ( 8811 ) supports and has configured call recording to a recording server that support G729/G722/G711. I have in configured in CUCM that G722 is disabled for phones that have recording enabled.There are 3 regions:Regio...
Hello all,
Just checking to see if it is still the case that if we were to move our call manager platform from one set of vmware, Cisco, to another, Dell, that we would no longer have support from Cisco on our Call Manager.
I heard that this rece...
Hello,
I have one phone that is in a different time zone than the others. Is it possible to keep this phone in the same device pool, but set its time zone differently for only the one phone?
Phone model: CP-8851
Thanks,
All,I am setting up a Voice service on my C-2951 router and would like to know1) which of the CME or CUCM will be suitable for the deployment?2) What Licensing information do I need to purchase for 10xSPA-525G and 1xCP-8831See below diagram (Router h...
Hi All
Anyone seen something like this before. I have a load of similar messages which seem to be coming from the same server similar to this:
Cisco Callmanager Snmp ServiceDetailedSignificant210010000Not Same as Publisher
I get further alerts agai...
