hello , -I have BE6000 version 10.5, I already install CUCM and Unity Connection. -The version is 10.5.1.10000.7. - I activated the service dhcp, and I configured server dhcp and subnet dhcp. -The issue is when I try to add the IP phone, the DHCP...
hello , -I have BE6000 version 10.5, I already install CUCM and Unity Connection. -The version is 10.5.1.10000.7. - I activated the service dhcp, and I configured server dhcp and subnet dhcp. -The issue is when I try to add the IP phone, the DHCP...
Dear all, I make all the documented configuration for missed call notification feature from Cisco unity connection side but unfortunately it didn't work. as it seems in the attached capture from the RTMT logs, it says that the client is not authentic...
Hi All , i have MGCP GW with VWIC2-2FXS connected to two analog phones, the two FXS ports are registered on Call Manager, the two analog phones can receive dial tone and make calls but when someone dial the DN of any one of them, hears fast busy tone...
Hi All , how can i get the software of Cisco unified attendant console version 11 both server and client side as i cannot find it at Cisco website? also the compatibility with CUCM and Windows server? Best Regards Essam
Dear, I have cucm 10.6 and want to configure extension mobility in a way that when user profile load. the device profile just goes for line 2 of the ip phone and the 1 line retrieve from the IP Phone Device Setting. Regards,
Is there a way to get reports from CDR that can go back a year?
hello all, am going to upgrade cuac enterprise 9.1 to cuac advanced 10.5, but the size of the existing cuace is 40 gb ,but for the cuace we need 80 as the minimum requirement, how should we increase the hardisk size ? manually or is there any cop fi...
Hi,System version: Prime Collaboration Provisioning 9.5.0.245I got the following error message during batch importing pseudo users: Workflow activity Order 2772 for PseudoUser332502273 timed outBatch operation has the error status.The problem is that...
The CUCM is version 11.0.1.20000-2. The problem: I cannot verify AXL SOAP Connectivity for CUCM. Can anyone provide a step by step guide for this? Most out there are outdated and non applicable to v.11 and later.
Hello, I wanted to ask if someone knows how to get the SNMP oid value to get the active calls on SIP trunks. I am able to get in Spectrum other SIP values like for example, the number of SIP trunks configured on CUCM, but I don't find the active call...
Hi All, Would like to have your inputs why the calling party transformation mask is not working when calling outbound. This is our setup GRC_TEST_RL Cube_RG ------------------------------> Calling Party Transformation Mask Configured SMW_E1_1_RG -...
Hi All, We will having an activity for the upcoming week where one of our voice gateway located at the remote site will be transferred to another site. We would like to know of what should we check prior of transfer of the Voice Gateway since we will...
Hi all, I am running CUCM version 8.6. I access to DB via command line, typing "run sql ..." commands . So far it´s ok. I want/need somehitng easier, eg TOAD or whatever. Do I have any software like TOAD, where can I use to do "queries" and see CUCM...
Dear all, We're kind of a partner with Cisco in China. Our SIP clients in the Intranet can register to CUCM and make calls to each other. Now, we intend to let our SIP clients in the Internet register to CUCM. As far as we know, Cisco expressway-edg...
Hello guys I was thinking about Resync Bandwidth option under System>Location>XLocation What does this do? When and why should I use it? According to this document: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_0_2/ccmcfg/bccm-80...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-18-2024 04:56 PM | ||
04-17-2024 01:06 PM | ||
04-11-2024 03:24 PM | ||
04-09-2024 09:23 AM | ||
04-02-2024 03:27 AM |
User | Count |
---|---|
6 | |
3 | |
3 | |
2 | |
1 |