Unified Communications Infrastructure

Problem with Conference Bridge Secure - CUCM -ISR 2901

Hello, I have a problem to configure a Conference Bridge Secure, the router has a self signed certifcate and the CUCM is signed by ca. So I uploaded the certificates between them, but the conference does not registered. These is the logs from router...

MRA Expressway E wants to use RMS or UCM_TelepresenceRoom license

Hello! I have a Expressway Cluster setup that is supposed to be ONLY for MRA. And yet, the Expressway E Servers (and only the E Servers) keep complaining that they are out of compliance and need either a RMS License or a UCM_TelepresenceRoom license ...

Resolved! RTP over CUCM without hardware media resources

Hello! We are moving to another ITSP and have a SIP trunk directly from the CUCM to their gateway. Would it be possible to route all RTP traffic through the CUCM? I tried to check "Media Termination Point Required" and assign a Media Resource Group w...

Resolved! CUCM Publisher data restoration in a cluster

I have a Publisher and two subscribers cluster.CUCM Pub failed. I ended up rebuilding v11.5 CUCM Publisher and restored the data from a backup. This was done twice with the same results. The Publisher DB is not in sync with the subscribers. Missing a...

Attendant Console Queue has an issue with Calls from particular gtw

My customer is having an issue with calls coming into a particular branch and being delivered to an Attendant Console Queue. Calls come into a Cisco 4321 voice gateway (Version 15.4(3)S7, RELEASE SOFTWARE (fc3)) via ISDN and delivered to CUCM (Vers...

Resolved! CUCM 11.0 Subscriber Rebuild

Our organization has a 5-node CUCM cluster (EOL/EOS version 11.0). One of the Subscriber nodes failed to recover when the UCS lost power during an electrical outage at the site where it is installed (UPS ran out). This is the output from CLI when it ...

Monitoring/alerting for issues with Unified Messaging and Speechview

Every now and then an issue of various sorts seems to pop up effecting Unified Messaging and/or Speechview. Unfortunately I tend to learn of these issues when they are reported by effected users. I would love to have a way to effectively monitor and ...

Can't login with Finesse after changing CUCM SSL certificate

Hi, we were using self-sign certificates for all of our collaboration apps, and now changed to multi-SAN certificates. we changed CUCM & CCX certificates, after that we faced issue with Finesse login. Jabber is working fine, also CCX reporting can l...

CUCM BE6K & BE7K

the CCW has a call manager announcement without any retirement documents as they will reach the EOS by 2-3-23 so is there any documents for a replacement or suggestions ??

Resolved! Collabration license model

Dears,I have call manager version 9 running in my enterprise and I am planning to upgrade it to latest through some steps i know its not one step attempt to version 14.I was wondering what license model dose cucm 9 use ? smart ? since there is enhanc...

Resolved! Adding a second phone to clients already configured account in CUCM

Hey Everyone I am looking for guidance on adding a second device to an already configured account. I have a client working from two locations, who needs a secondary phone. The client is unable to bring the already configured device with them, and req...

Resolved! CUCM 11.5 to 12.5 upgrade - need to increase VM resources

I have a two-node cluster on version 11.5.1 that I'd like to upgrade to 12.5.1. My current VMs have 2 vCPU, 4 GB memory, and 80 GB hard disk. In RTMT I keep getting alerts for low water mark hits and high memory usage so since I have the resources, I...

Resolved! CUBE Certificate Trusts - Secure Dial Peer

I am attempting to establish secure SIP connectivity and another organization. We both use different 3rd part certificate authorities. Is there a way in Cisco IOS / CUBE to load certificate trusts? I want to ensure that both SBCs trust the certific...

Prime Collab Deploy Certificate

I'm struggling to find the instructions on how to install a CA signed HTTPS certificate to PCD. Can anyone point me at the right place?Thanks,Gordon

Resolved! IM&P 14: Persistent Chat Room user access restrictions

Hello,Is it possible to limit access to a persistent chat room via Active Directory group membership rather than by chat administrators? For example, if we have a Dev chat room I'd want only users who are part of the Dev active directory group to hav...

Unified Communications Infrastructure

Forum Posts

Problem with Conference Bridge Secure - CUCM -ISR 2901

MRA Expressway E wants to use RMS or UCM_TelepresenceRoom license

Resolved! RTP over CUCM without hardware media resources

Resolved! CUCM Publisher data restoration in a cluster

Attendant Console Queue has an issue with Calls from particular gtw

Resolved! CUCM 11.0 Subscriber Rebuild

Monitoring/alerting for issues with Unified Messaging and Speechview

Can't login with Finesse after changing CUCM SSL certificate

CUCM BE6K & BE7K

Resolved! Collabration license model

Resolved! Adding a second phone to clients already configured account in CUCM

Resolved! CUCM 11.5 to 12.5 upgrade - need to increase VM resources

Resolved! CUBE Certificate Trusts - Secure Dial Peer

Prime Collab Deploy Certificate

Resolved! IM&P 14: Persistent Chat Room user access restrictions

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

CS-DESKPRO-K9++ USB Control

I want to know if certain DN's can forwarded with the called number

Cisco attendant console 14.0.2 unable to answer incoming external call

PCCE Finesse 12.6.2

VMware License for BE7M-M5-K9 Servers

Can CUCM be used to route calls between different sites?

MTLS does not take effect

I want add a comment to a voice-port or dial-peer

Cisco C8200 & C8300 Calls Per Second

CUCM 11.5 Overprovisioned