Hi All, is it possible to register the analog extensions of a VG310 to call manager in SIP? i found this configuration trace : https://frgtech.wordpress.com/2013/11/20/configure-voice-gateway-vg224-in-sip-with-cucm/ but I did not understand on the ca...
Forum Posts
Resolved! Why Dial Peer Isn't Being Matched
I have an existing CUBE with a functioning SIP trunk. I am provisioning a 2nd SIP trunk on the CUBE and am trying to test outbound calling on that new SIP trunk by creating a new/temporary dial-peer (dialpeer 210) with a destination-pattern of my cel...
Hi, When I play the call handler on Unity 10.5.2 and I get this error"initMMApplet: InitMMAppletInstance Failed to get instance". Do you know how to solve this? Currently I plan to save this recording and upload to Unity 14.x, but fail to get it done...
Want to check compatibility between Cisco Jabber Web SDK Add-on and Cisco UCCE. We are able to find references to - Jabber Web SDK with CUCM and CUCM with UCCE, but not directly between Jabber Web SDK and Cisco UCCE. https://developer.cisco.com/doc...
Firewall may be blocking media on UDP. Call quality may be impacted. For information regarding the network port requirements see the article Network Requirements for Cisco Webex Services.
Resolved! Toll Fraud issue
I have a CUCM ver 12.5.1 I need to block calls to PR numbers ( 1-787-XXXXXXX and/or 787-XXXXXXX) that are hitting generic RPs as follows a) 9.[2-9]XX[2-9]XXXXXX on Local Partition b) 9.1[2-9]XX[2-9]XXXXXX on LD partitions. So I created new SPECIFIC R...
Resolved! Call Profile vs Call Leg profile in CMS
Hello all,I am started a CMS deployment recently, I just need a clear explication of the difference between Call Profiles and Call Leg Profiles ?It seems like they have the same puspose (as far as I understood, is to assigne privileges, like host and...
Does anyone have a cube config with sip trunk to Deutsche Telekom?I have a manual from https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/interoperability-portal/connecting-unified-communication-manager.pdf but sip settings are differe...
Resolved! Call Handler Unity Connection
Good morning Everyone,I am trying to configure a handler and am not sure how to implement the below config. Any help will be appreciated. Main Line Hunt Pilot 1Hunt Pilot 2 6:00 - 8:008:00 - 5:00off hours ...
Hi guys We have some IP Phones and jabber clients with a different DN's for a specific department , we want to assign a comman DN when any IP phone in the cluster dial this Comman DN , all the IP phone we specify under this comman DN will ring at ...
Hello,We have 3 different clusters, each with their own Expressways, but we are all under 1 domain.When the system was setup years ago, they said only cluster 1 could have abc.com as their domain and the others had to have users sign in as 2.abc.com ...
Hi to everyone,We have SIP Cisco IP Phone <-> CUCM <-> SIP Trunk <-> CUBE <-> SIP Trunk <-> ITSP.When PRACK is enabled and Cisco IP Phone makes a call to a specific mobile destination, Cisco Phone does not hear Ring Back Tone.When PRACK is disabled i...
When you have call manager configured to send a call to Voicemail, but there is no mailbox configured where does the call end up? We recently updated our after hours voicemail box greeting, but in some instances it still plays the old greeting. This ...
Hello, I have CMS 3.6 installed and i need the sign in button to be disabled just for external guest access and keep it for internal access, is there any workaround that answers this request. Thank you.
We are in the process of upgrading our collaboration systems from CSR 11.0 to CSR 11.5. Our implementation includes several subsystems:UCMIM & PresenceUnity VoicemailMediaSense call recordingCCX/FinesseExpresswayWebex Room Kits4321 ISRsWe have been l...
