Unified Communications Infrastructure

Hi CiscoMay i know can we install Cisco Callmanager version 9.X on custom made server? i plan to buy one of custom made server from third party with free dos.Then i want to buy cisco callmanager version 9.x software to install on the custom made serv...

We are in the process of planning our upgrade from CallManager 8.5 to 10.5 and we have some questions.  We will also be upgrading Unity, Presence, Attendant Console, Contact Center, and Emergency Responder.  The question concerns Emergency Responder....

Hello,I will be deploying and configuring over 100 phones.  I was wondering if someone has a template (white paper) so I can input information on each phone of what the employee wants.Example:Line 1Line 2IntercomCalling Searchetc. Thanks

hiwe have callmanager 7.0 cisco under linux redhat, pub and sub and dl unity, before all work fine, but one day break energie caused shutdowning the all servers, and when restart all server we can not access to web gui of call mananger cannot display...

Hello, I receive this alarm continuously =>LogPartitionLowWaterMarkExceeded That is normal because the Used Disk Space is 91%. I have found on my CUC that the file below takes more than 136 Mo. admin:file list activelog cuc * detail size 19 Jan,2015 ...

Hello Team,We having an issue with Jabber voice 9.x with call manager 8.5.while we are calling from outside through vpn connect  there is one way audio issue.ip phone user can hear the audio from the jabber user.But opposite side there is no audio.Al...

Hello, Currently Running: Cisco Unified Communications Manager 8.6.2Cisco Unity Connection 8.6.2Problem:when any outside caller leaves a voicemail, the caller number information is not being sent to unity.example, I call with my cell phone, 817.555.1...

Hi,I have re-started cucm sub/pub on esxi host 5.0 and now i'm anable to access web GUI and can't ping to server IP.can access the console on vmware ping between two server work fine. Any idea to resolve this? 

I receive the following email alert reporting the CPU threshold is 98% but the process that uses most of the CPU is only 2%.What is the actual meaning of the alert? Subject: [RTMT-ALERT-StandAloneCluster] CallProcessingNodeCpuPegging  Processor load ...

Hello Team, We have configured cisco jabber voice with ucm 8.5 ,jabber voice client is registered succussfully but not able make the call from client as well as to the client.Also if there is using noncorprate wi-fi only jabber is registering in call...