Unified Communications Infrastructure

CUCM & isc dhcp server

I am deploying CUCM + GW.I am going to use isc dhcp server services.I have a variety of Cisco IP phones models.Does this configuration support the Cisco phones requirement for DHCP acquiring dhcp IPs from isc dhcp server ?authoritative; ddns-update-...

Resolved! Visual Voicemail issue in version 9.1

Hi group,I am testing Visual Voicemail but it is not working. Here is my environment:CUCM: 9.1.1.10000-11CUC: 9.1.1.10000-32Product Type: Cisco 9971Device Protocol: SIPActive Load ID: sip9971.9-3-2-10I am pretty sure of my configuration, same one is ...

Cisco UC integration for Lync not showing "On the phone"

I'm using the Cisco UC integration for Lync 2010 and so far it's been working well but in reading through the documentation, it looks like I should see "On the Phone" when someone is on the phone. Currently their status just shows as "Busy". Is the...

Resolved! CUE license requirements for upgrade 7.x to 8.6.4

Hi All,I want to upgrade existing CUE modules:- NME-CUEver 7.0ver 7.1- SM-SRE-700 ver 8.6.1- AIM2 ver 8.5.1ver 8.0.2ver 7.1to ver 8.6.4Can you please tell me should the existing licenses to be upgraded and if new licenses are required?Thanks in advan...

Upgrading CUE 7.0 to CUE 8.6 on Cisco 2821 NME-CUE

Hi guys,I read that migration form CUE 7.0 to 8,6 if possible, but I dont undersantd for license, this link tell that I contact with license page for migrate the license of mi actualy CUE 7.0, the question is, this migration has a cost? o is free i ...

Missing Fields in CUP 9.0

Hello everyoneI just installed CUCM and CUP 9.0.1i configure the CUCM and Presence to support Phones, i register phones etc....but on the Presence Administration under Application TAB i have only 5 subtabs? i don't have Cisco Personal Comunicator, De...

Prefixing a 9 and 91 to incoming calls from SIP provider for callback

I am wondering what would be the best options for prefixing a 9 or 91 to incoming calls over a sip connection to allow callback from missed calls and recieved calls. The setup iscallmanager 7.1.5 >>>>sip trunk>>>>>>>>>>>>CUBE>>>>>>>>>>>sip to ITSPI ...

Resolved! CUCM DID number is not directing to Extension

Hi, I added additional DID number on our current CUCM, but it is not directing to the extension, it is directing to the current number auto answer, any idea?Voice Gateway config:!dial-peer voice 1 potsservice aaincoming called-number 99112233!dial-p...

Resolved! Migrating CUCM v7.1 to CUCM v9.1

Hello Team, I am looking to get the help for purppose of existing setup (Migration/Designing and planning) for CUCM v7.1 CUCM Existing Setup: 1. Runing CUCM v7.1 on MCS 7816I4 (Phisical) server. 2. Phones model number 7940G firmware V8.1(2.0). Loo...

Resolved! migration problem with CUCM 8.6(1a) to 8.6(2a)SU1

Hello all.Yesterday we have migrated our telephone infrastructure from CM8.6(1a) to CUCM8.6(2a)SU1 , but process fails,the error message is "02/18/2013 18:13:26 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh...

XML Support on phone model 6941

There is an internal application on XML code to access a Database as a service from the phones, on phones model 8941 there is no problem at all, but on 6941 phone model I got the error message "XML Error [4]: Parse Error", can't detect wich part of X...

CUCM and CUC version 9 fresh installation

HiI have some questions about version 9 , if you can help with that1) When we go in ELM to Inventory/Product instances then we have to add there ONLY the CUCM Pub and CUC Pub?Or we have ot add also and the subscribers for cucm and cuc.As far as i kn...

CUCILync

We currently use Lync 2010 and CUCILync (CUCM 7.1.5). We are looking to upgrade to Lync 2013. Does anyone know if the current CUCILync client will work with Lync 2013? I cant seem to find any information anywhere about this. Thank you,

Resolved! Moving from MCS to UCS

Hi EveryoneI wanted to know can anyone tell me what is the process for moving from the MCS to the UCS server. I need to know once I have the UCS server up how do I migrate my information over to it from my MCS server,thanks in advance for the help a...

Resolved! MGCP interaction with CUCM and GW

Environment: Cluster --> 2 CUCMs - System version: 7.1.5.10000-12: CM voip1 and CM voip2. CM voip1 is the publisher and CM voip2 is the subscriber.GW --> 2 Cisco 2811 - version 12.4(13r)T.When configuring mgcp GW on CUCM, I verified that Cisco 2811...

Unified Communications Infrastructure

Forum Posts

CUCM & isc dhcp server

Resolved! Visual Voicemail issue in version 9.1

Cisco UC integration for Lync not showing "On the phone"

Resolved! CUE license requirements for upgrade 7.x to 8.6.4

Upgrading CUE 7.0 to CUE 8.6 on Cisco 2821 NME-CUE

Missing Fields in CUP 9.0

Prefixing a 9 and 91 to incoming calls from SIP provider for callback

Resolved! CUCM DID number is not directing to Extension

Resolved! Migrating CUCM v7.1 to CUCM v9.1

Resolved! migration problem with CUCM 8.6(1a) to 8.6(2a)SU1

XML Support on phone model 6941

CUCM and CUC version 9 fresh installation

CUCILync

Resolved! Moving from MCS to UCS

Resolved! MGCP interaction with CUCM and GW

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

CS-DESKPRO-K9++ USB Control

I want to know if certain DN's can forwarded with the called number

Cisco attendant console 14.0.2 unable to answer incoming external call

PCCE Finesse 12.6.2

VMware License for BE7M-M5-K9 Servers

Can CUCM be used to route calls between different sites?

MTLS does not take effect

I want add a comment to a voice-port or dial-peer

Cisco C8200 & C8300 Calls Per Second

CUCM 11.5 Overprovisioned