Hello, for lab purposes I was wanting to combine these three apps (cucm 8.6.2) on one ESXi PC.Is this feasible ?If so, can someone please advise RAM, CPU etc. specs in order to support this configuration.Thanks kindly for any advice.
Hi,I'm looking to get click to dial working through a 3rd party CRM system (SuperOffice) using CUPC. It's only choices are "Modem" (Cisco TSP), "program started from command line" and "DDE". I can get it to work using Microsoft dialer and Cisco TSP, ...
I have configured the service Agent login on the call manager with the integration of UCCX.when press the service button,it showing the following error"Cannot connect to the ip phone agent service"What could be the causes?Thankskavi
Hi I'm faced with the problem on JFW.Is anyone here who can utilize desktop sharing via VXME ?There is no display to 'share desktop' while having video call via VXME.When using 6215 without VXME, there is an icon for desktop sharing and can use it.Th...
when integrating uccx with cucm,under uccx administration page under unified CM configuration, the option RMCM subsystem is not available.and also the cti ports are not registed in cucm.whatcould be the cause for these issues?thankskavi
I'm staging a CER 8.5.1.10000-7 cluster in a ESX environment, but have run into an error while installing the Subscriber.The publisher installed without issues, I've added the subscriber reference in the publisher and rebooted. When I go to install t...
My users are using a Cisco 7911 ip phone. They would like me to set one of the buttons on the phone to be in speaker phone mode when the button is pressed. At the moment the only way they can use the speaker phone is to answer the phone by picking up...
IOS Version : c3845-advipservicesk9-mz.151-3.T1.binWhen I am dialing FAX number it is ringing and also getting FAX tone but FAX is not going or coming.Also FXS ports are registered in CUCM.Need your advice to troubleshoot.Below is the configuration o...
Hi guys,We are due to do a switch version for a customer with a PUB/SUB configuration. Both have had the update installed and sitting in the inactive partition.In the past, what I would have done is to disconnect the SUB from the network, switch vers...
We have a deployment of CUCI-Lync / Lync clinet installed on Windows 7 32 and 64 bit O/S. We have received reports from a number of staff who report that when their laptops are restored from sleep mode the CUCi-Lync client crashes. Lync Client 2...
I'm very unfamiliar with this technology, however, I've been put in charge of it. We're using Cisco Unified CM Administration v6.1 and currently we're unable to make calls out to any 900 or 330 prefixes and I can't figure out why. We've called our ...
After a reboot of my Cisco Unified Presence 8.6 there is a blinking cursor in the top left of the screen after POST. It was working fine before the reboot. Please HELP!!! TIA!!
Hello.I like to add a VG202 Analog Adapter to the system. But for that device i have to upgrade from 12.4(15)XZ2 with CUCME 7.0(0) to 12.4(24)T2 with CUCME 7.1(0). I didnt find any good inforamtion about upgrade.Is that an easy upgrade, just upload t...
Hello,Where on the Unity server is a user recording file saved. For example the recording that I record that says please leave me a voicemail, where is that located on the unity server, I need to replace with another wav file. We have Unity 7 that ...
Hi everybody, i have a problem with RTMT version 8.7 over CUCM 8.5.1.10000, when i try see the Critical Services of my cluster, i see a error "Exception in publish content", and it not show my service list, another functions of my RTMT have not any p...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
