Hi we have a unity connection 8.x customer that want to use Cisco pca and the Inbox feature to play messages on a GUI but not have the option to save the message locally . See attached , they don't want to be able to download the raw file (a...
I had previously thought that IOS 15.x was a mandatory requirement for 8.6 SRST routers. I have been advised that it's only madatory for CME-as-SRST and that 12.x will be fine for SRST (good news), but it is recommended. I know also there are minimum...
Hi,We have an issue that a MeetMe conference call has been opened and apparently has not been closed by one last participant. Unfortunately we do not know who it is and the participant also apparently is not aware that the line is still open. So how ...
Good morning.This may be a stupid question but i must ask. We have a quadrant fax solution in place today. Made up of a primary and slave server. each one is connected via a 3845 GW by t1. now if one fax server goes down the slave would pick up the t...
Does the MPE 2.X is supported on 7825-H4 any Idea? the document is a bit confusing when I try to install 2.0 or 2.1 I do not reach the media check and give me a message stating that there is no suitable driver for this kind of installation.
What command can reload AA but do not reload CME?When change a CME on AA configure or change the AA en_welcome.au file.application service aa flash:its-CISCO.2.0.2.0.tcl param operator 8000 paramspace english language en paramspace english index ...
Hello,Can anyone tell what does following mean"Circular—Selects the next available agent with the highest priority, based on the last agent selected and the agent order in the Resources list"I can't figure out what does it mean by " Selects the next ...
I have a 2851 router with 12.x IOS and SRST 6.x and want to upgrade my CM cluster to 8.6. I know that in order to run SRST 8.x I need IOS version 15.x on the router.My question is, do I need to upgrade two separate files on the router - one for IOS a...
Hello AllI have configured auto attendant on a voicemail box rather than a call handler as I only have 4 caller inputs. The problem is that after a callers reach the auto attendant and listens to the standard greeting I have recorded, there is no pau...
In the documentation it references being able to broadcast an IM to multiple users, or at least I thought I saw it. How do you broadcast a message to multiple users via CUPC 8.0?
We have a cluster configured (UC 8.5.1) and the incoming calls come into the subscriber, with the MWI and outcalling on the PUB. When we run the voice mail utilization reports found in the UC Serviceability webpage on the subscriber, it shows no inc...
Any possibility that the COBRA tools will use the Informix 64-bit drivers someday soon? So far, I've been unable to get the 32-bit drivers to install on my shiny new Windows 8 machine.Thanx...
Hi,i was trying to get the new "UC integration for sametime" to work. I used the previous version 8.6.2 successfully in our environment.Now the problem with 9.0.1: The config tool simply does not save the files to the update_site.There is always som...
Dear All I have VCS version X1.1 , I want to upgarde it to higher version , My question is Do have pdf or link how to upgarde VCS ???thanks and regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
