cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6302
Views
0
Helpful
3
Replies
Inderpal Oberoi
Cisco Employee

BE6S-PRI-M2-K9 IP phone door Bell Integration

Hello Team,

I need to know what options are available with BE6S-PRI-M2-K9 for IP phone door bell integration.

Any document explaining this would be very helpful ?

Regards

Inderpal Singh

1 ACCEPTED SOLUTION

Accepted Solutions
skilambi
Advisor

Inderpal

If this is a plain jain analog device use FXS, otherwise look at IP vendors like this

http://www.2n.cz/en/products/intercom-systems/analog-intercoms/helios/

View solution in original post

3 REPLIES 3
skilambi
Advisor

Inderpal

If this is a plain jain analog device use FXS, otherwise look at IP vendors like this

http://www.2n.cz/en/products/intercom-systems/analog-intercoms/helios/

View solution in original post

Hi Srinivasan,.

Thanks for your response.I saw documents related to CME and IP phone door bell using FXS, but did not find anything documents for BE6S platform mentioned with FXS port.Do we see any difference in terms of Configuration when using the above platform with Spare FXS port.

Regards

Inderpal Singh

Just follow the same process that you have used with ccm like you did in the past since be6ks is just ccm under the hood

Thanks

Srini

Content for Community-Ad

Spotlight Awards 2021