cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1249
Views
5
Helpful
3
Replies
Highlighted
Participant

Call manager and AD contacts (not users)

Is it possible to automatically import AD contacts in to the UCM directory (And not just users?) Version is 9.1.2.

 

Customer has Samaccountname for the user ID, but AD contacts don’t have a Samaccountname

 

Anyone done this before?

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

Hi

A little old, but this post sort of explains it. 

https://supportforums.cisco.com/discussion/10863521/ldap-users-cucm

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

3 REPLIES 3
Highlighted

Hi

A little old, but this post sort of explains it. 

https://supportforums.cisco.com/discussion/10863521/ldap-users-cucm

Aaron

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

Highlighted

Nice one, cheers fella. Hope you are well! Guess we are scuppered because their contacts don't have SAMAccountNames and the directory is set to use SAMAccountName as userID.

 

Never mind, useful info anyway.

Highlighted

Hi carlnewton,

Have you get resolved your issue, because I have a similar case. I want that cucm import AD Contacts (not users) instead of having sAMAccountName. I tested the Aaron's solution but it did not get work. for info I have CUCM 10.5

Best regards

Med