cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3357
Views
18
Helpful
3
Replies

Calling Number Presentation Unity Connection Call Transfer to external number

Hi,

if a caller reach a user voicemail and choose the caller input option to be forwarded to an alternate number (in this case the mobile number) I can see in the isdn debug that number of the used voicemail-port is used as calling number instead of the originating number. Any ideas how I could achieve that the originating phone number will be presented? The telco don't check or restrict the calling party number presentation (CLIP no screening)

I'm using a h323 gateway and CUCM-BE 8.6

Regards

Steffen

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame
Hall of Fame

Hi Steffen,

Have you tried playing with this setting?

CallManager System Parameter:

Clusterwide Parameters (Device - Phone)

Display Original Calling Number on Transfer from Cisco Unity = True

When we changed this parameter from the default = False to True the proper

clid is shown on transfers from UC 7.1

Cheers!

Rob

View solution in original post

3 Replies 3

Rob Huffman
Hall of Fame
Hall of Fame

Hi Steffen,

Have you tried playing with this setting?

CallManager System Parameter:

Clusterwide Parameters (Device - Phone)

Display Original Calling Number on Transfer from Cisco Unity = True

When we changed this parameter from the default = False to True the proper

clid is shown on transfers from UC 7.1

Cheers!

Rob

I confirm, it works well on CUCM 6.1.5.13900-4, no restart is needed. 5*.

Our Unity was calling out with port ID as caller ID. Changing this setting worked for me. CUCM 11.5.1

CUCM/System/ServiceParameters/ServiceDropdown/CiscoCallManager(Active)/Clusterwide Parameters (Device - Phone)

is path in 11.5

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: