CER not tracking phones in CUCM after upgrade from 10.0 to 10.5
Yesterday we upgraded from CER 10.0 to 10.5 and now CER isn't tracking our phones configured in CUCM. The configuration for CUCM cluster is unchanged, tested AXL connection and it's working, network connectivity appears to be ok to all UCM servers too. We have rebooted the CER Publisher as well, and no changes on the UCM servers. Any suggestions?
Well I deleted then re-added the CUCM configuration and restarted the Phone tracking service on CER. Took about 1 hour but it has now discovered the devices from UCM (about 2000) and appears to be reporting correctly now.
on January 25th and 26th, we're hosting a Technical Enablement Workshop which will guide you through the steps involved in updating your organisation from Jabber and/or Meetings to Webex App.
Very useful for partners and for customers t...
hi Team, we are planning to deploy Multi-Factor Authentication for Jabber. The main requirement is to use MFA over internet (MRA).Is it possible to deploy MFA just for MRA and don't touch impact any on-prem existing setup?Can someone please guide on ...
Looking to expand your professional network? Interested in gaining an edge with exclusive technology insights? Engage with Cisco experts, share feedback on products and connect with peers from across the globe. Cisco Champion 2021 applications are open fo...
UCCX does not natively protect HTTP Triggers.
I wanted to come up with a solution to handle HTTP cookie based authentication.
There is a zip file for this project attached to this article. It was written on UCCX 12.5...