cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
611
Views
0
Helpful
1
Replies

CIPC 7.0.5 compatibility with CUCM 9.1

tony loktu
Level 1
Level 1

Hi

I'm trying to figure out if Cisco IP Communicator 7.0.5.0 is compatible with CUCM 9.1

All i can find is the "Cisco Unified Communications System Release Summary Matrix for IP Telephony" but this matrix is "turned upside down" from my question.

http://www.cisco.com/en/US/docs/voice_ip_comm/uc_system/unified/communications/system/versions/IPTMtrix.html      

/Tony           

1 Reply 1

Manish Gogna
Cisco Employee
Cisco Employee

Hi Tony,

It may work with CUCM 9.1 but with some limited functionality as it has not been tested with CUCM 9.1. Please check the release notes of the CIPC 7.0.x version

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/release/notes/CIPC70_RN.html#wp116331

Highest callmanager version listed is 8.0

Ideally you should be using version 8.6 or higher

http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/8_5/english/release_notes/CIPC_Release_Notes_8_6_chapter_00.html#CIPC_RF_S79BC94C_00

It clearly lists cucm 9.1 as supported cucm version.

HTH

Manish

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: