cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
763
Views
0
Helpful
2
Replies

CIPC No Audio

dannoofWI
Level 1
Level 1

Occasionaly users report no audio when making calls on their CIPC phones over a VPN Connection. The only difference I see between a working phone and non-working, is the non-working CIPC has an IPv6 address assigned. The same CIPC phone works one day and not the next.

CUCM 8.6

CIPC 7

Where would I start looking for the problem?                  

2 Replies 2

anchoudh
Level 9
Level 9

Hi,

Please check if the correct Network Adapter is selected by navigating to CIPC->Network->Device Name

Hope it helps.

Anand

Please rate helpful posts !!

This had to go back burner as we moved through a large project but now it's returned.

Some more information - The Network Adapter uses SEP00000000XXXX where XXXX = the extension number. This is set in Call Manager and the device. The users connect to the home network through AnyConnect v2.5. This device does register with call mananger however its IP shows as 192.168.1.4 which is the IP on the devices lan.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: