09-12-2016 01:00 AM - edited 03-19-2019 11:34 AM
Dears,
I have seen the following document on the Cisco website;
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M4/install/C220M4/raid.html
Is there a "101" document anywhere that describes best practice first time configuration for "Cisco 12G SAS Modular BIOS Configuration Utility 5.10" for use with ESXi 6.0u2 and CUCM 11.5?
Solved! Go to Solution.
09-12-2016 04:31 AM
Here you are:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers/CUCM_BK_CF3D71B4_00_cucm_virtual_servers_chapter_01.html
09-12-2016 04:31 AM
Here you are:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CF3D71B4_00_cucm_virtual_servers/CUCM_BK_CF3D71B4_00_cucm_virtual_servers_chapter_01.html
09-14-2016 06:50 PM
Thank you very much Jonathan, that is exactly the document that I have been after :-)
09-15-2016 09:41 PM
hi Jonathan,
After selecting CTRL-R and then F2 for Operations on the controller, I am unable to Select "Create Virtual Drive" It seams to be greyed out. Is that because the virtual drive has already been created?
Also for the C220-M4S,
1. Is it preferable to create 1 VD and add all 8 physical drives to that in the raid?
2. For best practice, which drive should be selected as the boot drive or does it matter?
regards
Darin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide