Cisco call manager 6.x

[mohammedanasshaikh]

where will i find a guide that helps me configure a cisco call manger 6.x with a cisco CME 2801 router ???

[Jaime Valencia]

exactly what are you trying to configure?

your post does not provide enough information to help you

javalenc

[mohammedanasshaikh]

i hav a 2801 router which has some ip phones connected to it, and i hav a call manager 6.x i want to interconnect these two in such a way that the call manager becomes a publisher nd the 2801 is the subscriber that is the 2801 will send the call records to the call manager...

[Jaime Valencia]

ok, you can have the phones with either CUCM or CME, but not with both. in any case what you would need to use is CUCM + SRST

the terms PUB and SUB are only used in CUCM environments, not with CME.

there's plenty of material within CCO

and here:

http://www.cisco.com/univercd/home/home.htm

since you're new you will need to start reading a lot if you really want to learn

HTH

javalenc

if this helps, please rate