I have setup Cisco Expressway-C and E for MRA and B2B calls using SIP URI and everything is working fine. Also, I have my TelePresence Endpoints and Jabber registered to CUCM. Now we is looking for IP Dialing from CUCM registered TelePresence endpoints to 3rd party video endpoints which are not part of CUCM environment. Some of the third party video endpoints are on the internal network and some are on public network. Can someone please point me to the configuration document to setup IP dialing using same Expressway C and Expressway E.
Thanks,
Vaijanath
Please rate helpful posts and if applicable mark "Accept as a Solution". Thanks, Vaijanath S.
Hi ,
I have setup Cisco Expressway-C and E for MRA and B2B calls using SIP URI and everything is working fine. Also, I have my TelePresence Endpoints and Jabber registered to CUCM. Now we is looking for IP Dialing from CUCM registered TelePresence endpoints to 3rd party video endpoints which are not part of CUCM environment. Some of the third party video endpoints are on the internal network and some are on public network. Can someone please point me to the configuration document to setup IP dialing using same Expressway C and Expressway E.
Thanks,
Vaijanath